首页 >> 新闻中心 >> 100kN平托盘最大工作荷载试验机Pallet Maximum Working Load Tester
100kN平托盘最大工作荷载试验机，依据GB/T34394，用于平托盘工作载荷、额定载荷测试，托盘抗弯刚度试验、铺板刚度试验、堆码试验、托盘加强筋抗压抗弯测试、托盘板面抗弯性能测试。
GB/T15234-2025塑料平托盘；GB/T4995-2025平托盘性能要求和试验选择；GB/T4996-2025平托盘试验方法；GB/T20077-2025一次性托盘；GB/T40481-2021联运通用滑板托盘尺寸及性能要求；GB/T31148-2022木质平托盘通用技术要求；GB/T40479-2021通用半托盘尺寸及性能要求； GB/T41231-2021竹木刨花模压成型托盘通用技术条件；GB/T23898-木质平托盘用人造板；GB/T26947-2023步行式托盘搬运车；GB/T26949.4-2022工业车辆稳定性验证第4部分托盘堆垛车双层堆垛车和操作者位置起升高度不大于1200mm的拣选车；GB/T27542-2019蓄电池托盘搬运车；HS/T67.6-2021海关辐射型货物和（或）车辆检查系统 第6部分：航空托盘类检查；JB/T14150-2021叉车属具单双托盘叉；JB/T14173-2021单元托盘储存类穿梭车货架；JB/T 14921-2024热连轧机组托盘式钢卷运输线通用技术规范；JB/T15345-2025自动托盘配送机；JT/T1349-2020多功能钢质托盘技术要求；LY/T2061-木质模压工业托盘；LY/T2375-托盘用木材质量分级；QB/T8215-2026再生塑料制品平托盘；SB/T11265-2025循环共用系统托盘质量要求；SN/T 4790-2017箱型托盘基本要求和试验方法；结构木材集成材人造板材制品质量性能检测系统；10kN～100kN微机控制人造板材人造板材胶合板防火板万能试验机；300kN长试样人造板材大跨度抗折弯曲强度试验机；300kN单板层积材结构木材力学性能试验机；LVL层积胶合集成规格材抗弯强度及抗弯弹性模量试验机；400kN预制木质工字梁静曲强度性能试验机；300kN结构木材集成材力学特性试验机（AS NZS 4063.1）；30kN～300kN模压托盘力学性能试验机；WDW-J20kN门窗型材角强度试验机(PVC-U)；1000mm/1500mm门窗型材落锤冲击试验机；MHH-5N人造板划痕试验机；MGL-5N人造板滚动磨损试验机；MJL-5;5J人造板材冲击性能试验机；150N.m防火门闭门器启闭可靠性试验机；MJL-10纸面石膏板冲击性能测定仪；WGP-20kN石膏板断裂荷载硬度试验机；20kN石膏砌块断裂荷载试验机；
Pallet Maximum Working Load Tester；Laminated Veneer lumber Structural Timber Wood Mechanical Properties Test System；Computer Wood-based Panels Testing Machine；Fire-proof plate Testing Machine；Wood Timber Artificial Board Testing Machine；MDF Testing Machine；Wood-based Panels Large Span Flexural Strength Tester；MDF Large Span Flexural Strength Tester；Large Span Artificial Board Flexural Strength Tester；Molded Pallets Mechanics Properties Tester；Structural Timber Characterization Tester；Laminated Veneer lumber Structural Timber Mechanical Properties Tester；Laminated Veneer Lumber Bending Strength Elastic Modulus Tester；Prefabricated Wood I-Joists Static Bending Performance Tester；Angle Strength Testing Machine；Falling Ball Impact Tester；Impact Tester of Wood-based Panels；Gypsum Plate Board Falling Ball Impact Tester；Fire-proof Door Shutter Testing Machine；Gypsum Board Breaking Load Hardness Testing Machine；Gypsum Blocks Breaking Load Tester；Box pallets-Principal requirements and test methods；Pallet quality requirements for pooling system；Quality classification of timber used in pallets；Flat pallets-Test methods；Flat pallets-Performance requirements and selection of tests；Wood-based panel for wooden flat pallets；Wooden flat pallet-General technical requirement；Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels；Glued laminated bamboo flooring；Structural glued laminated timber；Standard for methods testing of timber structures；Medium density fiberboard；Laminated veneer lumber；Wooden flooring for gymnasium；Block board；Laminate flooring；Timber structures Test methods；Determination of mechanical properties of wood based panels；Plywood Bonding quality Test methods；Particleboards and fiberboards-Determination of tensile strength perpendicular to the plane of the board；Polyvinyl acetate emulsion adhesives for woods；Oriented strand boards (OSB)-Definitions classification and specification；Test methods for physical and mechanical properties of small clear wood specimens；Collection of sample tree；Sampling methods and general requirements；Determination of the growth rings width and latewood rate of wood；Determination of shrinkage；Determination of water absorption；Determination of swelling；Determination of bending strength；Determination of modulus of elasticity in bending；Determination of ultimate stress in compression parallel to grain；Determination of tensile strength parallel to grain；Determination of strength in compression perpendicular to grain；Determination of the modulus of elasticity in compression perpendicular to grain； Determination of tensile strength perpendicular to grain；Method of testing in shearing strength parallel to grain of wood；Determination of impact bending strength；Determination of resistance to impact indentation；Determination of static hardness；Determination of cleavage strength；Determination of nail and screw holding power；
|
