首页 >> 新闻中心 >> 电力电子能源动力电气工程测试系统Power Electronics Energy Power Electrical Engineering Test System
电力电子能源动力电气工程测试系统；户外机柜机械性能力学试验机；100N.m～300N.m通信光缆光纤接头盒连接器扭转弯曲疲劳试验机；500kN线缆拉力试验套管成型快速液压机；2kN～10kN光缆光纤接头盒连接器分纤箱接续箱卧式拉伸试验机；1000kN复合绝缘子芯棒应力腐蚀试验机；锂电池极片涂布180°剥离试验机；CST500kN电线电缆电力金具卧式拉伸试验机；1000N电气连接器综合强度试验机(GB/T5095.8电子设备用机电元件基本试验规则及测试方法*接触件及引出端的机械试验)；￠150mm/6m电缆及电缆护套夹紧装置抗拉拔力及接线强度试验机(GB/T5095.8接触件固定性试验，绝缘安装板固定性试验)；200N电气连接器插拔力试验机(GB/T5095.8电子设备用机电元件基本试验规则及测试方法)；200N.m电缆夹扭转耐力试验机(GB/T5095.9电子设备用机电元件基本试验规则及测试方法*偏斜45°～50°旋转360°)；0.5～240mm²电缆夹旋转弯曲耐力试验机；1000N电缆夹机械应力90°循环旋转弯曲耐力试验机(GB/T5095.9电子设备用机电元件基本试验规则及测试方法)；电池包组机械强度多工位蠕变持久试验机；油浸式变压器波纹储油柜疲劳试验台；变压器波纹储油柜耐压试验变形自动检测装置；20000N.m30t绝缘子组件拉压弯扭测试系统；50kN线夹对地线导线握力试验机；DL/T765.3-电力金具试验方法； 硅芯管静态摩擦系数测试仪；10N.m焊接电源冲击试验机；30kN～120kN焊机跌落提升试验机；GB/T25120-2023轨道交通机车车辆牵引变压器和电抗器；GB/T28857-2025差动变压器式位移传感器；GB/T46131-2025特高压变压器用分接开关技术要求与试验方法；NB/T11307.2-2024电力设备与材料着火危险评定导则第2部分油浸式变压器；HG/T2887-变压器类产品用橡胶密封制品；JB/T7633-2025变压器用螺旋板式强油水冷却器；NB/T11873-2025陆上风力发电场升压站用电力变压器技术规范；JB/T8318-2025变压器用成型绝缘件技术规范；NB/T11874-2025海上风力发电场升压站用电力变压器技术规范；NB/T11875-2025光伏发电场升压站用电力变压器技术规范；500KV及以上变压器用冷轧取向电工钢带；TB/T3391机车车辆隔离变压器；YB/T6148-2023电力变压器用高锰无磁钢板；TB/T3205.1钢轨引接线；TB/T3572-2022铁路电力变压器；DL/T765.3-2021架空配电线路金具第3部分额定电压35kV及以下架空绝缘导线金具；GB/T5095.8-电子设备用机电元件基本试验规程及测量方法；第8部分连接器接触件及引出端的机械试验；
Power Electronics Energy Power Electrical Engineering Test System；Oil-immersed Transformer Corrugated Oil Storage Tank Fatigue Test Bench；Transformer Ripple Oil Conservator Withstand Experimental deformation Automatic detection Device；Automatic Deformation Detection Device for Withstand Voltage Test of Transformer Ripple Oil Conservator；Composite Insulator Component Tension Compression Bending Torsion Test System；Clamp grip force on ground wire conductor Tester；Composite Insulator Core Stress Corrosion Tester；Railway Overhead Lines Tension Tester Verification Device；Cable Tension Test Sleeve Forming Rapid Hydraulic Machine；Outdoor Cabinets Mechanical Properties Tester；Optical Fibre Cables Torsion Bending Fatigue Tester；Optical Cables Splice Torsion Bending Fatigue Tester；Optical Fiber Splice Torsion Bending Fatigue Tester；Optical Fiber Connector Torsion Bending Fatigue Tester；Electric Connector Synthetical Strength Tester；Electric Connector Plugging Force Testing Machine；Cable clamp Torsion Endurance Tester；
Cable clamp Rotary Bending Endurance Tester；Electric Cables and Wires Horizontal Tensile Testing Machine；
Optical Fibres Cables Horizontal Tensile Testing Machine；Optical Fiber Cable Distribution Box Tensile Tester；Optical Fiber Splice Closure Tensile Tester；Fiber Optical Splice Box Tensile Tester；Horizontal Tensile Testing Machine for Closure；Horizontal Tensile Testing Machine for Optical Fibers and Cables；
Lithium Battery Coating Peel Adhesion Properties Tester；The code of distribution transformer operation；Regulation of operation and preventive maintenance for AC 1000kV oil-immersed transformer and shunt reactor；Technical conditions of use by pad-mounted transformer；Selection guide to the electrical steel strip for power transformer；Electric power testing and measuring vehicles；Part 5 Testing vehicles for partial discharge in power transformers；Calibration specification of transformers tester Part 3 Temperature measuring devices for oil-immersed transformers；Technical specification for lOOOkV step-up transformer of power station；Guide for the choice of insulation board and component in oil-immersed transformers；Selection guide to the high-voltage bushings for power transformers (reactors)；electric test integrated wiring test method for power transformer；Test method for optical fiber temperature measuring device used in oil-immersed transformer；Site test specification for smart high voltage power transformer；Overhead distribution lines fittings；Part 3: Overhead insulated conductor fittings of rated voltages up to 35kV；Electromechanical components for electronic equipment-Basic testing procedures and
measuring methods；Part 8: Connector tests(mechanical) and mechanical tests on contacts and terminations；
|
