|
|
|
首页 >> 新闻中心 >> 100kN人造板大跨度抗折弯曲强度试验机Wood-based Panels Large Span Flexural Strength Tester
100kN人造板大跨度抗折弯曲强度试验机,测定长试样木材人造板的静曲强度和弹性模量,采用三点弯曲和四点弯曲试验方法,测试长试样木材初期抗弯载荷、最终抗弯载荷、正弯曲力学性能、负弯曲力学性能。
→胶合板、不饱和聚脂树脂装饰胶合板刨花板,硬质纤维板、中密度纤维板MDF,结构用及非结构用单板层积材,表面装饰板、聚乙烯薄膜饰面人造板、装饰单板贴面人造板、浸渍胶膜纸饰面人造板,细木工板、实木复合地板、浸渍纸层压木质地板、竹地板、实木地板,挤压板、蜂窝状板、孔状板、空心结构板,木家具等物理力学性能测试研究。集成材组坯、结构用集成材、同等组合结构用集成材、异等组合结构用集成材、对称异等组合结构用集成材、非对称异等组合结构用集成材、大截面结构用集成材、中截面结构用集成材、小截面结构用集成材、等截面结构用集成材、变截面结构用集成材、水平结构用集成材、垂直结构用集成材、通直结构用集成材、弯曲型集成材、轴心受力用结构集成材、受弯结构用集成材等物理力学性能测试研究。水平型指结层板、垂直型指结层板、结构用胶合木、木嵌块等物理力学性能测试研究。机械应力分等层板纵接层板、机械应力分等非纵向接长层板(MSR层板) 物理力学性能测试研究。大跨度长试样人造板试验机,木材弯曲强度试验机;人造板总剥离率最大剥离率测定;人造板木破率特征强度测定;人造板内胶合结合强度测定;人造板表面胶合强度测定;人造板胶层剪切强度测定;人造板浸渍剥离性能测定;人造板沸煮剥离性能测定;结构用集成材减压加压剥离性能测定;聚氯乙烯膜饰面人造板耐剥离力测定;人造板握螺钉力测定;人造板顺纹抗压强度弹性模量试验机;木材垂直承载力试验机;木材横纹承载力平行承载力试验机;结构木材顺纹横纹抗拉强度试验机;结构木材拉伸弹性模量试验机;结构木材接缝抗剪强度试验机;结构木材弯曲强度抗压强度试验机;木材垂直抗压抗拉承载力试验机;木材横向承载力扭转刚度试验机;木基结构板材力学性能试验机;木材规格材顺纹抗剪强度试验机;45mm95mm规格材拉伸试验机;受弯木结构集成材理化力学试验机;装配式轻型木结构指接规格材试验机;饰面用木质锯切薄板力学试验机;原木产品检验力学试验机;胶合板单板层积材旋切单板原木弯曲试验机;饰面刨切单板原木荷载试验机;木材横纹抗拉极限应力试验机;hrjtest;木材径向弦向破坏荷载力学试验机;木材物理力学硬度试验机;GB/T50329-2012木结构试验方法标准;GB/T35217-2017;GB/T15787-2017原木检验;ISO 3346;ISO 3129;GB/T15779-2017;石膏板断裂荷载硬度试验机;GB/T15106-2017;GB/T1943-2009;人造板防火板万能试验机;瓷砖板材弯曲强度抗折试验机;hrjtest;GB/T14017-2009;脚手架木模板弯曲强度试验机;GB/T1929-2009;AS/NZS 4063.1-2010;AS/NZS 4357.2;ISO 1033-1;ISO/DIS 12578;ISO/CD 12579;ISO/CD 12580;ISO/CD 18375;ANSI/AITC A 190.1;ASTM D 3737;DIN 1052;EN 386;EN 390;EN 408;BS EN 789;BS EN 326-1;GOST 9624;CNS 11671:2014;CNS 444:2012;ANSI/APA PRG320-2012;EWS S475;APA PS 1-09;APA L294-2011;ASTM D5055-2013;ASTM D3528;NF B51-127-19;ASTM D5456-2010a;APA EWS S550-2005;BS EN 1912:2012;GB 50005-2017;GB 50009-2012;GB 50206-2012;GB/T26899-2011;GB/T17659.1-2018;GB/T17659.2-2018;GB/T29893-2013;GB/T29897-2013;GB/T50329-2012;GB/T50708-2012;GB/T50772-2012;GB/T51233-2016;GB/T51226-2017;LY/T1927-2010;LY/T2228-2013;LY/T2388-2014;JGJ/T265-2012;
Wood-based Panels Large Span Flexural Strength Tester;MDF Large Span Flexural Strength Tester;Large Span Artificial Board Flexural Strength Tester;Wood-based Panels Long Test Specimen Tester;Wood Parallel Compression Strength Modulus of Elasticity;Wood grain Compression Strength Parallel to Grain;Bearing Strength Perpendicular to Grain;Method for determination of the modulus of elasticity in compression parallel to grain of wood;Standard for methods testing of timber structures;Cutting panel tester;Terms in log inspection;Log of peeled veneer tester;Log of sliced veneer;Method for determination of the modulus of elasticity in compression perpendicular to grain of wood;Method of testing in tensile strength perpendicular to grain of wood;Method of sample logs sawing and test specimens selection for physical and mechanical tests of wood;Structural Timber Characterization Tensile Tester;hrjtest;Dimension Lumber Characterization Tester;Characterization of structural timber-Test methods;hrjtest;Stress-graded Timber tester;Bending Strength and Apparent Modulus of Elasticity;Tension Strength Parallel to Grain;Compression Strength Parallel to Grain;Beam Shear Strength;Bearing Strength Perpendicular to Grain;Bearing Strength Parallel to Grain;Modulus of Rigidity in Torsion;Tension Strength Perpendicular to Grain;
|
|
|
| |