首页 >> 新闻中心 >> HRJ结构木材集成材拉压扭剪特性测控软件Structural Timber Characterization Tester
HRJ结构木材集成材拉压扭剪特性测控软件，测定木结构部件拉伸性能、框架部件拉伸性能、LVL层积木拉伸性能、PSL平行积成木拉伸性能、胶合层积木拉伸性能、规格材拉伸性能、原木材拉伸性能。hrjtest；测定木结构部件压缩性能、木结构部件扭转特性、木结构部件抗剪性能。
300kN结构木材特性试验机测试木材顺纹抗拉强度、横纹抗拉强度、顺纹抗压强度和弹性模量、木材顺纹抗剪强度、接缝抗剪强度、木材弯曲强度和弹性模量。测试木材垂直抗压承载力、木材抗拉承载力、木材横向承载力、木材扭转刚度。300kN结构木材拉伸试验采用液压夹具自动夹持，高刚性、高稳定性、无振动冲击流线型卧式荷载机架，大于1.2倍木材试验荷载刚度；高强度可视安全防护网；
AS/NZS 4063.1:2010；AS/NZS 4357.2；ISO 1033-1；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；hrjtest；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294：2011；ASTM D5055-2013；ASTM D3528；NF B51-127-19；ASTM D5456-2010a；APA EWS S550-2005；BS EN 1912：2012；GB 50005-2017；hrjtest；GB 50009-2012；GB 50206-2012；GB/T26899-2011；GB/T17659.1-2018；hrjtest；GB/T17659.2-2018；GB/T29893-2013；GB/T29897-2013；GB/T50329-2012；GB/T50708-2012；GB/T50772-2012；GB/T51233-2016；GB/T51226-2017；LY/T1927-2010；LY/T2228-2013；LY/T2388-2014；JGJ/T265-2012；
规格材材质等级检验方法；木结构试验方法；木材强度等级检验方法；建筑结构荷载规范；受弯木结构力学性能检验方法；木基结构板材力学性能指标；jnshiyanji；集成材理化性能试验方法；木结构工程施工质量验收规范；胶合木结构技术规范；规格材目测分级规则；木结构设计标准；建筑工程方木原木结构设计；建筑工程轻型木结构设计；原木及板材材质标准；建筑工程承重胶合木结构设计；原木锯材批量检查抽样判定方法；多高层木结构建筑技术标准；装配式木结构建筑技术标准；轻型木结构用指接规格材；轻型木结构连接件通用技术条件；轻型木结构锯材用原木检验；hrjtest；轻型木桁架技术规范；应力分级木材；300kN规格材特性试验机；300kN木结构弯曲强度试验机；300kN结构木材抗剪强度试验机；600kN木结构力学性能试验机；jnshiyanji；100kN长试件木材强度试验机；120kN大跨度木材力学试验机；200kN集成材力学性能试验机；600kN原木板材力学试验机；1000kN木结构荷载强度试验机；
Structural Timber Characterization Tester；hrjtest；Dimension Lumber Characterization Tester；Characterization of structural timber-Test methods；Stress-graded Timber；Bending Strength and Apparent Modulus of Elasticity；Tension Strength Parallel to Grain；Compression Strength Parallel to Grain；Beam Shear Strength；Bearing Strength Perpendicular to Grain；Bearing Strength Parallel to Grain；Modulus of Rigidity in Torsion；Tension Strength Perpendicular to Grain；Compression Strength and Modulus of Elasticity Perpendicular to Grain；Shear Strength at Joint Details；Testing Rectangular Sections of Sawn Solid Timber；Structural laminated veneer lumber (LVL) Test methods；Determination of structural properties-Test methods；Determination of mechanical properties of wood based panels；Determination of modulus of elasticity in bending and of bending strength；Plywood Bonding quality Test methods；Determination of tensile strength perpendicular to the plane of the board；Sampling and cutting of test pieces and expression of test results；Test method of evaluating the properties of glued-laminated timber；hrjtest；Code for design of timber structures；
http://www.jnshiyanji.com/Show_Pic_cn.asp?id=4952&Menuid=159&Columnid=11；Visual grading rules for dimension lumber in light wood frame construction；Load code for the design of building structures；Code for acceptance of construction quality of timber structures；Technical code of glude laminated timber structures；Finger jointed structural dimension lumber in light wood frame construction；General specification for connector of light wood-frame construction；Log for lumber in light wood frame construction；jnshiyanji；Code for construction of timber structures；Technical code for light wood trusses；Sampling and judging methods for lot inspection of logs；Sampling and judging methods for lot inspection of sawn timbers；Tension Strength Hydraulically Operated Fixture；Standard for methods testing of timber structures；
济南恒瑞金试验机有限公司；结构木材特性试验机；山东省力值硬度计量委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心）
|
