首页 >> 新闻中心 >> JC/T647泡沫玻璃绝热制品压折强度试验Cellular glass Compression Flexure Test
JC/T647-2014泡沫玻璃绝热制品适用于工业绝热、建筑绝热等领域使用的具有封闭气孔结构的泡沫玻璃绝热制品，其使用温度范围为73K～673K（-200℃～400℃）。附录A抗压强度试验方法；附录B抗折强度试验方法。
50kN泡沫制品压折试验机；50kN玻璃制品压折试验机；50kN泡沫制品压折强度试验；50kN玻璃制品压折强度试验；hrjtest.com；50kN绝热制品压折试验机；50kN绝热制品压折强度试验；≥0.8MPa绝热制品抗压试验；500kN半钢化玻璃弯曲试验机；≥0.5MPa泡沫玻璃抗压试验；≥0.4MPa绝热制品抗折试验；20kN泡沫制品抗折试验机；10kN玻璃制品抗折试验机；30kN绝热制品抗折试验；50kN泡沫制品抗压试验；≥0.8MPa绝热制品抗折试验；20kN玻璃制品抗压试验机；30kN绝热制品抗压试验；2200N/s压力试验机；1000kN增强玻璃抗折试验机；600kN浮法玻璃弯曲试验；hrjtest.com；≥0.6MPa工业泡沫抗折试验；800kN镀膜玻璃抗弯应力试验；≥0.5MPa泡沫玻璃抗折试验；玻璃抗弯强度试验；玻璃压缩试验力测试；玻璃四点弯曲试验；jnshiyanji.com；玻璃双环弯曲试验；热处理平板玻璃强度测试；≥0.6MPa工业泡沫抗压试验；建筑玻璃弯曲强度的测定；U型玻璃弯曲强度试验；
150kPa～300kPa绝热塑料压缩强度；350kPa～500kPa绝热塑料压缩强度；平板玻璃混合料抗折强度；
Compression Flexure Tester；Cellular glass product for thermal insulation；Foam Compression Tester；Cellular glass product Compression Tester；hrjtest.com；Thermal insulation Compression Tester；Four point Bending Tester；Loading ring Tester；Supporting ring Tester；Thermal insulation Flexure Tester；Cellular glass product Flexure Tester；Foam product Flexure Tester；Cellular glass product Compression Flexure Tester；Gypsum plate Tester；EN1863-1；EN1863-2；ASTM C 1048-04；BS EN 1288-1；BS EN 1288-2；jnshiyanji.com；BS EN 1288-3；Fire-proof plate Test；Construction mortar Test；Wall Thermal Insulation Materials Test；Electronic Servo Compression Tester；Flexure Testing Machine；Sic Bending Testing Machine；Glass in building-Determination of the bending strength of glass；GB/T9962；GB/T11614；GB/T10801.2；GB/T2918；Fundamentals of testing glass；Coaxial double ring test on flat specimens with large test surface areas；Test with specimen supported at two points；Testing of channel shaped glass；hrjtest.com；Coaxial double ring test on flat specimens with small test surface areas；Heat strengthened glass；Safety glazing materials in building；Tempered glass； BS EN 1288-4；BS EN 1288-5；GB/T17841；GB/T15763.2； GB/T8624-2012；GB/T8813；JC/T648；Testing Machines Manufacturer；Mechanics Tester Manufacturer；Testing Machine Service Center；Testing Machine Fittings Supply Center；Test Accessories Design Manufacture Center；Special Test Accessories Center；China Material Tester；Asia Material Tester；International Type Material Tester；Asia Spring Tester；International Spring Tester；Shandong Society For Measurement；Jinan HengRuiJin Testing Machine Co.,Ltd.
济南恒瑞金试验机有限公司 山东省计量测试学会力值硬度计量专业委员会委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心）
|
