首頁 >> 試驗機案例 >> 30kN緩沖墊板動靜剛度疲勞測試系統Buffer Pad Dynamic Static Stiffness Fatigue Test System
30kN緩沖墊板動靜剛度疲勞測試系統，Q/CR785-2000高速鐵路CRTS Ⅲ型板式無砟軌道橡膠彈性緩沖墊層疲勞試驗方法。
→以恒定頻率向CRTS Ⅲ型彈性墊層試樣（尺寸爲100mmx60mm）施加垂向循環荷載，經過3x106次荷載循環後，測定CRTS Ⅲ型彈性墊層的永久變形和靜剛度變化率。
→向加載鋼板施加5kN～25kN垂向循環荷載，加載頻率4±1Hz，荷載循環3x106次。
→CRTS Ⅲ型彈性墊層3x106次荷載循環試驗後，將被測彈性墊層試樣取出。在23±2.0℃環境中靜置24h。
→在疲勞前原測量位置測量被測彈性墊層試樣厚度，取平均值作爲疲勞後被測彈性墊層試樣的厚度，按公式計算疲勞後厚度變化率。
→按照附錄A的試驗方法進行靜剛度測試，測得疲勞後剛度，按公式計算疲勞後剛度變化率。
→CRTS Ⅲ彈性墊層疲勞試驗機荷載30kN。疲勞試驗空間≥200mm，位移變形0.01mm。
→試驗波形：正弦波，實時顯示疲勞荷載-位移曲線。HRJ彈性墊層加載鋼板支撐鋼板120x80x40mm。
→HRJ高剛性高穩定性、無振動沖擊流線型載荷機架，人體工程學設計。
→HRJ-Test橡膠彈性材料伺服疲勞試驗軟件/可定制國際版。
→HRJFT-100kN墊板動剛度試驗機，100x60x8mm墊板動剛度試驗，測試墊板表面最大和最小位移量。頻率3-5Hz，荷載不小于100kN,上加載鋼板下支撐鋼板厚度不小于40mm，三支千分表（位移傳感器）。
→HRJFT-100kN墊板疲勞性能試驗機，頻率3-5Hz，荷載不小于100kN,振幅不小于3mm，經過300萬次荷載循環後，測定永久變形和靜模量變化。上加載鋼板下支撐鋼板厚度不小于40mm。
→HRJFT-100kN墊板靜剛度試驗機，100x60x8mm墊板靜剛度試驗，測試墊板表面在荷載作用下産生的位移量。荷載不小于100kN,上加載鋼板下支撐鋼板厚度不小于40mm，三支千分表（位移傳感器）。計算靜剛度。
→HRJFT-100kN彈簧隔振器靜剛度試驗機，隔振器直徑20mm，上加載鋼板下支撐鋼板厚度不小于40mm，三支千分表（位移傳感器）。
→HRJFT-100kN隔離式減振墊靜模量試驗機，樣品300x300x厚度3件，上加載鋼板下支撐鋼板厚度不小于40mm，三支千分表（位移傳感器）。
→HRJFT-100kN隔離式減振墊動模量試驗機，樣品300x300x厚度3件，最大荷載50kN,上加載鋼板下支撐鋼板厚度不小于40mm，三支千分表（位移傳感器）。
→HRJFT-100kN隔離式減振墊疲勞性能試驗機，樣品300x300x厚度3件，頻率3-5Hz，荷載不小于100kN,振幅3mm，經過1000萬次荷載循環後，測定隔離式減振墊永久變形和靜模量變化。上加載鋼板下支撐鋼板厚度不小于40mm。
→TB/T3329-2013/XG1-2023電氣化鐵路接觸網隧道內預埋槽道》行業標准第1號修改單；TB/T2074-2020 電氣化鐵路接觸網零部件試驗方法；Q/CR 1001-2023電氣化鐵路接觸網隧道內預埋槽道；GB/T41217-2021城市地鐵與綜合管廊用熱軋槽道；GB/T 37613-2019預埋槽道型鋼；TCAMET 02003-2017 城市軌道交通預埋槽道及套筒技術標准；預埋槽道本體的疲勞特性測試（TB/T3329-標准5.5.6）；（TB/T3329-5.5.7）500x500m預制混凝土槽道錨杆T型螺栓組合一體疲勞特性測試；GB/T38695-2020 城市軌道交通無砟軌道技術條件；附錄G墊板動剛度附錄F墊板靜剛度附錄H墊板疲勞性能；TB/T3514-2018客貨共線鐵路道岔用橡膠墊板；TB/T3515.4-2018彈性支承塊式無砟軌道部件第4部分塊下墊板；TB/T2344.1-2020鋼軌第1部分43kg/m～75kg/m鋼軌；TB/T2344.2-2020鋼軌第2部分道岔用非對稱斷面鋼軌；TB/T2344.3-2018E鋼軌第3部分異型鋼軌；TB/T3395.1-2015高速鐵路扣件通用技術條件；UIC 864-5；JIS E 1117；TKTJ9904-1；TB/T3395.2-2015高速鐵路扣件彈條Ⅳ型扣件；TB/T3395.3-2015高速鐵路扣件彈條V型扣件；TB/T3395.4-2015高速鐵路扣件WJ-7型扣件；TB/T3395.5-2015高速鐵路扣件WJ-8型扣件；TB/T3396.1-2015高速鐵路扣件系統鋼軌縱向阻力的測定；TB/T3396.2-2015高速鐵路扣件系統組裝扣壓力的測定；TB/T3396.3-2015高速鐵路扣件系統組裝靜剛度的測定；TB/T3396.4-2015高速鐵路扣件系統試組裝疲勞性能試驗；TB/T3396.7-2015高速鐵路扣件系統預埋件抗拔力試驗；TB/T1495-2020彈條I型扣件；TB/T3065-2020彈條II型扣件；TB 1389混凝土軌枕用每米43公斤鋼軌橡膠墊板型式尺寸；TB/T456.2-2019/XG2-2025《機車車輛自動車鈎緩沖裝置第2部分自動車鈎及附件》行業標准第2號修改單；HG/T3328-鐵路混凝土枕軌下用橡膠墊板；TB/T3545-2019/XG1-2024《機車懸挂裝置橡膠件》行業標准第1號修改單；TB/T2841-2019鐵路車輛空氣彈簧；GB/T21527-軌道交通扣件系統彈性墊板；JIS E4710；JIS E4206；JIS K6385；CNS 10067；CNS 10068；KS R9222-2014；KS M6726-2016；KS M6745；ONORM NS EN 13913Ed.1；ONORM UNI NS EN 13597；100kN橡膠彈性緩沖墊層靜剛度動剛度疲勞試驗機；減振墊板緩沖墊板動靜剛度疲勞測試系統；彈簧隔振器橡膠隔振器動靜剛度疲勞試驗機；隔離式減振墊剛度疲勞試驗機測試系統；彈性緩沖墊層動靜剛度疲勞試驗機系統；5kN橡膠伸張疲勞試驗機；100kN軌道交通鐵路隧道預埋槽道疲勞試驗機；100kN接觸網隧道內預埋槽道滑動荷載試驗機；HRJ-100kN槽道抗拉抗剪測量儀；1500kN鋼軌裂紋監測試驗機；3000kN微機控制鋼軌靜彎曲試驗機；ZDW-50kN鐵路道岔轉轍機擠脫力試驗機；500kN電液伺服混凝土軌枕靜載試驗機；HRJ-100kN砌體通縫截面抗剪強度試驗儀；HAT-3500N.m/650kN高強螺栓自動測試儀；200kN門式盤扣碗扣鋼管腳手架扣件構件試驗機；200kN鋼管腳手架構件扣件試驗機； JG 13-門式鋼管腳手架；碗扣式盤扣式鋼管支架構件試驗機；VTM-3全自動砂漿豎向膨脹率測試儀；100kN水工混凝土軸向拉伸極限強度試驗機；200kN超高性能混凝土抗拉強度試驗機；3000kN全級配混凝土小梁彎曲試驗機；20kN波紋管土工膜綜合力學試驗機；YZS-300kN混凝土抗彎拉強度試驗機；牆體及吊頂輕鋼龍骨靜載沖擊綜合性能試驗機；5kN波紋管縱向載荷試驗機；全級配混凝土抗壓強度試驗機；100kN土工材料格柵綜合力學性能試驗機；500N水泥抗硫酸鹽侵蝕抗折強度試驗機；軌道交通運輸車輛零部件質量檢測系統；油浸式變壓器波紋儲油櫃疲勞試驗台；變壓器波紋儲油櫃耐壓試驗變形自動檢測裝置；絕緣子拉壓彎扭機械性能試驗系統；高壓電力絕緣子組件拉壓彎扭機械性能測試系統；50kN架空配電線路懸垂線夾順線握力試驗裝置；彈簧分選自動化智能測試系統；HRJ在線人造板材厚度自動測量系統；鐵礦球團全自動壓力試驗機系統；彈簧壓力試驗自動化智能測試系統；
Buffer Pad Dynamic Static Stiffness Fatigue Test System; Vibration Isolating Pad Dynamic Static Stiffness Fatigue Tester；Buffer Pad Dynamic Static Stiffness Fatigue Test System；Spring Isolator Dynamic Static Stiffness Fatigue Test System；Rubber Isolator Dynamic Static Stiffness Fatigue Test System；Vibration Isolator Pad Dynamic Static Stiffness Fatigue Test System；Elastic Buffer Pad Dynamic Static Stiffness Fatigue Test System；Rubber Tension Fatigue Testing Machine；Rubber elastic layer of CRTS Ⅲ slab track for high-speed railway；The specification of rubber pads for turnout of passenger and freight railway line；Low vibration track components Block pad；43 kg/m～75 kg/m rails；Switch and crossing rails；Specification for Compromise Rails；Fastening systems for high-speed railway Part 1General requirement；Fastening systems for high-speed railway Part 2 Type IV fastening system；Part 3 Type V fastening system；Part 4 WJ-7 fastening system；Part 5 WJ-8 fastening system；Test methods for fastening systems of high-speed railway Part 1 Determination of longitudinal rail restraint；Determination for clamping force；Determination of static stiffness for fastening assembly；Test of fatigue performance of fastening assembly；Vertical load test for cast-in fastening components；Type I fastening system；Type II fastening system；Air spring for railway vehicle；Automatic coupler and draft gears for rolling stock. Part 2:Automatic couplers and accessories；Rubber pads for under railroad concrete sleepers；Elastic pads for rail transit fasten system；Rubber suspension components for locomotive；
Railway Tunnel Anchor Channel Bolt Fatigue Tester；Railway Tunnel Anchor Channel Bolt Sliding Load Tester；Steel Rails Crack Monitoring Tester；Steel Rails Static Loading Bending Testing Machine；Railways Switch Machines Squeeze Out Force Tester；Concrete Sleeper Static Loading Tester；Masonry Shear Strength Along Mortar Joints Tester；High Strength Bolt Automatic Testing System；Tester for Frame Scaffolding With Steel Tubules；Steel Tubular Scaffold Components Member Couplers Tester；Bowl-coupler Type Steel Tube Scaffolding Member Tester；Disk Lock Steel Tubular Scaffold Components Tester；Vertical Expansion Rate Tester of Mortar；Hydraulic Concrete Axial Tensile Strength Tester；Ultra-high Performance Concrete Tensile Strength Tester；Fully-graded Concrete Flexural Strength Tester；Anti-glare Board Mechanics Properties Tester；Construction Mortar Tester；Wall Thermal Insulation Materials Tester；Gate-type Wall Thermal Insulation Materials Tester；Concrete Flexural Tensile Strength Tester；Wall Panel Light-gauge Steel Furring Load Impact Properties Tester；Corrugated Pipe Axial Load Tester；Fully-graded Concrete Compressive Strength Tester；Corrugated Pipe Ring Stiffness Geosynthetics Load Tester；Slip Coefficient of Faying Surface Tester；Mean Slip Coefficient Tester；Cement Flexure Strength Tester；Rail Transit Transport vehicles Component Quality Test System：Automated Intelligent Test System；Power Electronics Energy Power Electrical Engineering Test System；Construction Machinery Heavy Equipment Transport Vehicles Component Dynamic Fatigue Test System；Medical Engineering Medical Device Product Biological Materials Mechanical Test System；Servo Control Universal Material Horizontal Tensile Strength Tester；Rail Transit Highway Water Transportation Construction Material Engineering Quality Testing System； Steel Strand Relaxation Static Load Anchoring Tester；Tension Creep Rupture Strength Tester；Hydraulic Servo Constant Stress Compressive Tester；Hydraulic Jack Verification Reaction Frame Structural Multi-functional Test System；Laminated Veneer lumber Structural Timber Wood Mechanical Properties Test System；Metal Wire Material Bolt Connection Components Torsion Properties Tester；Spring Tension Compression Torsion Fatigue Stiffness Properties Tester；High-speed Tensile Testing Machine System；Electronic Universal Tension Compression Flexural Torsion Material Intelligence Test System；Steel Bar Steel Tube Metal Material Components Member Flexural Tester；Mechanics Calibration Verification Standard Machine；Oil-immersed Transformer Corrugated Oil Conservator Fatigue Test Bench；Special Custom Non-Standard New Scientific Research Test System；Overhead Line Spacers Grip Force Test Device；Spring Sorting Automated Intelligent Tester；Wood-based Panel Online Automatic Thickness Measurement System；Iron Ore Pellets Automatic Compression Tester；Spring Compression Force Intelligent Test System；
|
