试验机_济南恒瑞金试验机有限公司

100N.m5000N浮动油封跑合磨损泄漏性能试验机，用于过程流体动力学研究，流体机械密封结构力学研究，流体设备旋转接头密封材料研究，流体润滑理论研究。指导流体机械密封结构设计，石油化工流体搅拌机械装备研究设计，压力容器密封技术设计。测试浮封环组件在转动过程中的摩擦磨损状况，研究验证浮封环可靠性能，验证浮封环耐久性能。Hrjtest；在注入润滑油的状态下实现相对转动，模拟油气水、粉尘、黏土砂粒等实际工况，浮封环润滑油滴漏状况实时监控，浮封环试验温度实时监测，浮封环实际使用工况4倍～5倍强化试验测定，浮封环轴向加载性能试验，浮封环角度偏移加载试验，浮封环偏轴偏移加载，浮封环角度偏移加载和偏轴偏移加载组合试验。绘制浮封环温度-时间曲线、扭矩-时间曲线。

JB/T8293-2014浮动油封；GB/T14211-2019机械密封试验方法；JB/T6619.2-2018轻型机械密封试验方法；30kN密封件疲劳试验机系统；10kN浮封静态密封性能试验机；30kN浮封抗压荷载试验机；5000h浮动油封磨损疲劳寿命试验机；100N.m端面密封动态跑合性能试验机；GB/T24795.2-2011；GB/T30911-2014；GB/T31330-2014；GB/T10708.2；GB/T27800-2011；GB/T34028-2017；JB/T6619.2-2018；GB/T21283.4-2008；GB/T11023-2018；GB/T37995-2019；GB/T36879-2018；GB/T37210-2018；GB/T27572-2011；GB/T33154-2016；GB/T10708.1；GB/T27568-2011；GB/T23658-2009；GB/T25364.2-2010；MT/T784-2011；YS/T60-2019；ISO 16589-4；ISO 23711；ISO 4635；ISO 9553；hrjtest；MT/T1164-2011；MT/T1165-2011；hrjtest；MT/T985；HG/T3326；HG/T3096-2011；GB/T23662；GB/T10708.3；GB/T13871.4；GB/T28604-2012；JB/T8872-2016；JB/T11959-2014；JB/T7369-2011；JC/T2402-2017；TB/T3419-2015；TB/T3102.4；TB/T3103.2；MT/T580；MT/T985；NB/T20478.1-2018；NB/T20478.2-2018；HG/T2810；HG/T3326；ISO 16589-4；工程机械行走部件浮封动态密封试验；端面浮封动态密封试验；采煤机轻型机械密封运转试验；旋转转动轴密封运转型式试验；平地机装载机浮封动态密封试验；DO型浮封动态密封性能试验；浮动油封1500h强化工作寿命强化试验；5kN密封件疲劳试验系统；￠50～608mm浮动油封跑合磨损泄漏性能试验机；10000N橡胶密封摩擦磨损试验机；支重轮浮封动态密封性能试验；10kN浮封环面压静压荷载试验机；唇形密封圈动态性能试验机；支重轮对跑合磨损试验机；齿轮箱磨合磨损泄漏性能试验机；5000N填料密封件疲劳试验机；椎间融合器生物力学性能试验机；10kN聚合物复合材料拉拉疲劳试验机；500N密封胶拉伸疲劳试验机；50kN铝型材疲劳性能试验机；100kN弹性垫层疲劳试验机；100kN4000Nm密封圈高低温压扭疲劳试验机；10kN橡塑高分子材料拉压疲劳试验机；掘进机盘形滚刀摩擦磨损疲劳寿命试验机；5000N橡胶伸张疲劳试验机；

Floating Ring Seal Abrasion Testing Machine；Floating Seal Running Wear Leakage Performance Tester；Floating Ring Seal Friction Wear Tester；Elastomeric Seals Friction Wear Tester；Mechanical Seal Friction Wear Tester；hrjtest；Mechanical Seal Element Running Wear Tester；Rubber Seal Friction Wear Tester；Rotary shaft lip seals Tester；Double Seal Friction Wear Tester；Running Attrition Tester；Seal Ring Compression Molding Tester；hrjtest；Reciprocating rubber seals；Design criteria for standard applications；Rubber seals of act on double seal；Turbocharger seal rings Test method；Specification for carbon-graphite sealing ring for mechanical seals；Blanks for cemented carbide sealing ring；Compounds of reciprocating rubber seals；Rubber seals used for full face tunnel boring machine；Rubber ring of main drive chain for wind turbine generator system；Recirculating ball power steering lips seals；Valve stem reciprocating seals of engine and performance test method；Test method of SF6 gas tightness；Requirements for materials for pipe joint seals；Resistant inflatable and water filled rubber sealing products；Sealing Ring High Low Temperature Compressive Torsion Fatigue Tester；Caterpillar Band Sealing Ring Fatigue Durability Life Tester；