3000N.m螺栓摩擦系数试验机用于螺栓连接副螺纹摩擦系数、螺栓支撑面摩擦系数、螺母支承面摩擦系数、总摩擦系数性能测定及研究。
3000N.m螺栓摩擦系数试验机；3000N.m支撑面摩擦系数试验机；3000N.m螺母摩擦系数试验机；3000N.m螺栓连接副摩擦系数试验机；HRJ Tester；3000N.m摩擦型螺栓扭矩试验机；3000N.m承压型螺栓试验机；3000N.m抗拉型螺栓系数试验机；3000N.m扭剪型螺栓系数试验机；3000N.m大六角螺栓摩擦系数试验机；3000N.m方头螺栓摩擦系数试验机；HRJ Tester；3000N.m预载荷螺栓摩擦系数试验机；3000N.m汽车螺栓摩擦系数试验机；3000N.m船舶螺栓摩擦系数试验机；3000N.m桥梁螺栓摩擦系数试验机；3000N.m风电螺栓摩擦系数试验机；3000N.m轨道交通螺栓系数试验机；3000N.m航空螺栓扭矩试验机；3000N.m起重螺栓摩擦系数试验机；3000N.m传动螺栓拉扭试验机；3000N.m铁塔螺栓摩擦系数试验机；3000N.m钢结构螺栓摩擦系数试验机；3000N.m建筑栓接连接副试验机；3000N.m栓接连接副摩擦系数试验机；单一栓接连接副试验机；HRJ Tester；2000N.m高强螺栓扭矩试验机；40kN.m螺栓连接副扭矩试验机；2000N.m高强螺栓拉扭试验机；1000kN高强螺栓拉伸试验机；GB/T32076.2-2015预载荷高强度栓接结构连接副；GB/T16823.3紧固件扭矩-夹紧力试验；NB/T31082-2016风电机组塔架用高强度螺栓连接副；GB/T3632钢结构用扭剪型高强度螺栓连接副；60000psi碳钢螺栓扭矩试验机；120ksi钢螺栓扭矩试验机；HRJ Tester；30kN.m螺栓高低温扭转试验机；
Coefficient of Total Friction Tester；Coefficient of Friction Between Threads Tester；Coefficient of Friction Between Bearing Surfaces Under Nut or Bolt Head；High Strength Bolt Connection Torsion Testing Machine；HRJ Tester；Preloading Structural Bolting Assemblies Test System；High strength bolt Automatic Testing System；High Strength Bolt Horizontal Tensile test System；High Strength Bolt Tensile Tester；High strength bolt Axial Force Testing；High Strength Structural Bolting Assemblies Test；Preloading High Strength Structural Bolting Assemblies Test；Bolting Assemblies Torque Coefficient Test；Torque Clamp Force Testing；Wind Turbine Bolting Assemblies Test；Bolting Axial Force Test；Bolting Torque Coefficient Test；High-strength structural bolting assemblies for preloading；System HR-Hexagon bolt with large width across flats and nut assemblies；System HV-Hexagon bolt with large width across flats and nut assemblies；M39～M64 Hexagon bolt with large width across flats and nut assemblies；Fasteners-Torque clamp force testing；HRJ Tester；Mechanical properties of fasteners-Bolts；High-Strength Structural Bolting Assemblies For Preloading Suitability For Preloading；Sets of high strength torque control bolt；Measuring method for friction coefficient of screw thread pair of automobiles；120ksi(830MPa) and 150ksi(1040MPa) Minimum Tensile Strength；Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service；Testing Machines Manufacturer；Mechanics Tester Manufacturer；Tester Service Center；Tester Fittings Supply Center；Material Testing Machine；Various Testing Machines；Laboratory Equipment；Test Accessories Design Manufacture Center；Special Test Accessories Center；China Material Tester；Asia Material Tester；World Material Tester；HRJ Testing Machine；
济南恒瑞金试验机有限公司；螺栓力学试验机制造商；山东省力值硬度计量委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心）
上一篇：700kN～2500kN铁道车辆缓冲器静压试验机Railway Vehicle Draft Gears Static Load Tester
下一篇：3000kN混凝土快速压力试验机Concrete Rapid Pressure Tester |
