5000kN/10000kN全级配混凝土抗压强度试验机
Fully-graded Concrete Compressive Strength Tester
重要功能参数：
→测定全级配混凝土立方体抗压强度和圆柱体轴心抗压强度。
→测定全级配混凝土立方体试件劈裂抗拉强度。
→大体积混凝土构件、高强混凝土构件、岩石管桩构件抗压强度和抗压弹性模量测试研究。
→大体积混凝土构件及砌块抗压强度和抗压弹性模量测试研究。
→混凝土抗压力试验载荷5000kN/10000kN，≤±1.0％。
→混凝土抗压强度试验空间＞1200mm（可定制）。
→四立柱间距（LW）＞800x800mm（可定制）。
→高刚度钢质垫板承压面平整度＜0.03%。
→SCT静音型伺服泵站，加荷速度0.01～8.00MPa/s，试验力加载0.1～60kN/s。
→全级配混凝土抗压试验球座，放置于试件顶面并凸面朝上，转动灵活。
→全数字闭环、多通道、多功能、易操控的HRJ-Test混凝土力学性能测控软件；多种标准方法（国标、国军标、英标、美标、德标、日标、意标、俄标、法标、澳标、欧标等/GB、GJB、ISO、JIS、ASTM、DIN、BS、NF、EN、AS、NBR、IEC、GOST、CNS)。
引用标准、文献文件：
10000kN全级配混凝土抗压强度试验机；5000kN全级配混凝土劈裂抗拉强度试验机；300mm3混凝土劈裂抗拉强度试验；jnshiyanji.com；450mm3混凝土劈裂抗拉强度试验；600mm混凝土抗压强度弹性模量试验；3000kN全级配混凝土弯曲强度试验机；1200mm混凝土抗弯拉强度试验机；HRJ Tester；1700mm混凝土抗弯强度试验机；45mm高强度HRJ钢制加压头；500mm高刚度钢质垫板；1000kN全级配混凝土轴向拉伸试验机；450x1350mm混凝土抗拉强度试验机；300x900mm混凝土轴心抗拉强度试验机；三级配混凝土抗压强度试验机；四级配混凝土抗压强度试验机；简支梁三分点加荷法测定全级配混凝土抗弯强度。
DL/T5150-2017；JGJ/T294-2013；TB 10425-2019；TB 10424-2018；GB/T50081-2019；SL 352；SL 264；JGJ/T385-2015；JTG E30；ASTM C55-06；DIN 4165；JIS A5416；BS EN 771-4；ГОСТ25485；ГОСТ21520；HRJ Tester；ASTM C496；ASTM C1106；ASTM C902；ASTM C936；EN 1338；ISO 4108；JIS R1535；TB/T3275-2018；TB 10115-2014；TB 10077-2019；TB 10218-2019；TB 10402-2019；jnshiyanji.com；TB 10064-2019；TB 10102；JT/T1148-2017；GB/T50107；GB 50164；
Fully-graded Concrete Compressive Strength Tester；Fully-graded Concrete Flexural Strength Tester；Fully-graded Concrete Static Compressive Elastic Modulus Tester；Fully-graded Concrete Axial Tensile Tester；Concrete Axial Tension Load Tester；Test code for hydraulic concrete；Standard for test methods of concrete physical and mechanical properties；Concrete Splitting Tensile Strength Tester；Mortar Axial Tensile Strength Tester；Mortar Compressive Strength Tester；Mortar Splitting Tensile Strength Tester；Mortar Bonding Strength Tester；Concrete Sleeper Static Loading Tester；Standard for evaluation of concrete compressive strength；Standard foe quality control of concrete；Standard for assessment of high performance concrete；jnshiyanji.com；Strength testing of high strength concrete；Test Methods of Cement and Concrete for Highway Engineering；Railway Concrete construction Strength Tester；Standard for Check and Accept Concrete Strength of Railway；Railway Concrete Engineering Strength Tester；Fully Automatic Concrete Compressive Strength Tester；Concrete Physical Mechanical Properties Tester；Concrete Member Loading Tester；Concrete Curbs Compressive Flexural Strength Tester；Concrete Beam Member Tensile Strength Tester；Concrete Segment Flexural Strength Tester；Concrete Segment Resistance to Pull off Tester；Tester Fittings Supply Center；HRJ Material Mechanical Tester；
上一篇：暂无产品
下一篇：橡塑 布 纤维拉伸附具 |
