WDS-XD 10N--8000N Tensile Testing Machine for Rubber and Plastic

1 Important function:

1) Roll type Waterproofing in construction industry: test and research for mechanical with roll type bituminous waterproofing, modification of high polymer of bituminous waterproofing, roll type of macromolecule waterproofing, elastomer modification of bituminous waterproofing, roll type of waterproofing for pre-paving and wet paving, roll type of asphalt base polyester, one side glued, double sides glued, two type of waterproofing.

2) Roll type of petroleum and bituminous waterproofing material, bituminous compounding waterproofing, glass fiber based, clothing based and paper based rolling material, self-bonding rubber asphalt water proof rolling material, self bonding polymer/ alphalt water proof rolling material, plastic polymer asphalt waterproofing rolling material, EPDM rubber waterproofing rolling material, polyethylene based rolling material.

3) Test and research for mechanical with natural rubber, compounding rubber, liquid rubber(dry rubber), emulsus rubber, universal compounding rubber, half-universal compounding rubber, special purpose compounding rubber, special type of compounding rubber, medcal biology rubber, foam rubber, butadiene styrene rubber, chemigum, hydrogenated butyronitrile, butyl rubber, butadiene rubber, isoprene rubber, silicone rubber, EPR(ethylene propylene rubber), neoprene, hard rubber, soft rubber, vulcanizate, rubber compound, 1 type, 2 type, 3 type, 4 type, pant type, perpendicular type and new moon type of sample.

4) Test and research with plastic film, universal plastic, engineering plastic, special type of plastic, reinforced plastic, foam plastic, thermoset and themoplasticity plastic, hydrocarbon plastics, moulded plastic, laminated plastic, medical plastic, bulletproof plastic, biology plastic, 1B, 2 type, 4 type, 5 type of sample.

5) Test and research with hard and half hard thermoplasticity material, hard and half hard thermoset laminated board, felt, textile, roving, chopped strand, mixed fiber reinforced material, fiber reinforced thermoset and thermoplasticity compounding material.

6) Test and research with thin board, plate, belt, foil, flat, stick, sectional, tubular product, sheet, round, rectangualr and ring shaped, proportional, nonproportional sample, cutting sample, rectangle, round, cross sectional sample.

7) Test and research with textile, food, medcine, customic, biology, flexure, elastic, foam, electronic part, thin metal, fine wire, fiber, adhesive.

2 Standard:

1) ISO 23529: Rubber -- General procedures for preparing and conditioning test pieces for physical test methods

2) ISO 37: Rubber, vulcanized thermoplastic -- Determination of tensile stress-strain properties.

3) BS EN 13707:2013 Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing . Definitions and characteristics.

4) BS EN 13956:2012 Flexible sheets for waterproofing. Plastic and sheets for roof waterproofing. Definitions and characteristics.

5) ISO 16012:2015 Plastic -- Determination of linear dimensions of test specimens.

6) ISO 527 - 1:2012 Plastic -- Determination of tensile properties -- Part 1: General principles

7) ISO527 - 2:2012 Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics

8) Plastic -- Determination of tensile properties -- Part 3: Test conditions for films and sheets

9) ISO 527-4:1997 Plastics --Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites.

10) ASTM D7078/D7078M-12 Standard Test Method Shear Properties of Composite Materials by V-Notched Rail Shear Method.

11) ISO 14130 :1997 Fibre-reinforced plastic composites -- Determination of apparent interlaminar shear strength by short-beam.

3 Specification