WDW-Z Series 5/10/20/50kN Computer Control Ceramic Tile / Gypsum Board Bending Testing Machine
1 Introduction:
1) Test and research for bending property with variety of ceramic tile, asbestos cement corrugated tile, asbestos cement flat board, straw board, gypsum board, light thermal insulation board, wooden board, non-metal composite board,
2) testing and providing data according standards of GB, ISO, JIS, ASTM, DIN, BS and other international standard.
tensile, compression and bending test with variety of rubber, plastic, film and other nonmetal material
3) test with variety of metal, thin metal, wire, fine wire, fiber, elastomer, foam.
4) test with textile, food, medicine, cosmetic, biological material.
5) tensile, peeling and welding strength test with electronic component.
6) Peeling, bending and fastening property for PCB circuit board
7) test with wooden, paper, film production and other nonmetal material.
8) strain relaxation and adhesive strength test.
2 Standard:
1) DIN 53291 - Testing of sandwiches, compression test perpendicular to the faces
2) DIN 53292 - Testing of sandwiches, tensile test perpendicular to the face
3) DIN 53293 - Testing of sandwiches, bending test.
4) DIN 53294 - Testing of sandwishes, shear test
5) ASTM C1658/C1658M-2013 Standard Specification for Glass Mat Gypsum Panels
3 Specification
|
No. |
Item |
Specification |
|
1 |
load capacity |
5kN/10kN/
20kN |
30kN/50kN |
100kN |
|
2 |
grade |
0.5/1 |
|
3 |
range of load |
0.4% -- 100%FS |
|
4 |
relative error of indicated value |
between +/- 0.5% (grade 0.5) / +/-1.0% (grade 1) |
|
5 |
resolution of load |
1/+/-300000FS without change |
|
6 |
range of deformation |
0.2% -- 100% |
|
7 |
range of force speed |
0.005% -- 5%FS/S |
|
8 |
precision of force speed |
speed is less than 0.05%FS, between +/-1% of set value.
speed is more than 0.05%FS, between +/-0.5% of set value. |
|
9 |
range of deformation speed |
0.005 ¨C 5%FS/s |
|
10 |
precision of deformation speed |
speed is less than 0.05%FS/s, between +/-1% of set value.
speed is more than 0.05%FS/s, between +/-0.5% of set value. |
|
11 |
range of displacement speed |
0.001 ¨C 600mm/min (customizable 25m/min hgih speed test system) |
|
12 |
precision of displacement speed |
between +/-0.2% of set value. |
|
13 |
range of force, deformation and displacement |
0.5% -- 100%FS |
|
14 |
precision of force, deformation and displacement |
set value is more than 10%FS, between +/-0.5% of set value.
set value is less than 10%FS, between +/-1% of set value. |
|
15 |
test span |
more than 1100mm |
|
16 |
stroke of transom |
0 ¨C 1000mm |
|
17 |
voltage |
220+/-10%, 50Hz (reliable landing) |
|
18 |
power |
750W |
1500W |
3000W |
|
19 |
size of load frame |
1500*1300*1900 |
1700*1400*2100 |
1800*1500*2400 |
|
20 |
weight |
400kg |
600kg |
900kg |
|
|
|
|
|
|
|
