|
WDW-J Series Computer Control Electronic Universal Testing Machine Cantilever Structure
1 Important function
1) test research for tensile, compression, bending, torsion, shearing test with metal, nonmetal and composite material under room temperature.
2) thin panel, board, belt, foil, flat material, wire, bar, sectional bar, pipe, sheet, square, round, rectangle, and ring shaped, cast iron, alloy of cast iron, part of tube, proportional sample(proximate coefficient k=11.3 or 5.65), non-proportional sample, sample for longitudinal split of whole thick, sample for horizontal split of whole thick, cross section of rectangular sample, cross section of round sample.
3) test for property with thin metal, wire, fine wire, fiber, elastomer, foam.
4) test for property with textile, food, medicine, cosmetic, rubber, plastic, thin film, biological material.
5) test for tensile, peeling, welding strength with electronic components.
6) test for peeling, bending, fastener property with printed circuit board.
7) tensile test with wooden product, paper production, film.
2 Specification
|
No. |
Item |
Specification |
|
1 |
load capacity |
5N/10N/20N/50N/100N/200N/500N
1000N/2000N/3000N/5000N |
|
2 |
grade |
0.5/1 |
|
3 |
range of load |
1% -- 100%FS(grade 1)/0.4% -- 100%FS(grade 0.5) |
|
4 |
relative error of indicated value |
between +/-1.0%(grade 1)/ +/-0.5%(grade 0.5) |
|
5 |
resolution of force |
1/+/-300000F.S |
|
6 |
range of deformatio |
0.2% -- 100% |
|
7 |
range of force speed |
0.005% -- 5%FS/S |
|
8 |
precision of force speed |
speed is less than 0.05%FS, between +/-1% of set value.
speed is more than 0.05%FS, between +/-0.5% of set value. |
|
9 |
range of deformation speed |
0.005% -- 5%FS/S |
|
10 |
precision of deformation speed |
speed is less than 0.05%FS/s, between +/-1% of set value.
speed is more than 0.05%FS/s, between +/-0.5% of set value. |
|
11 |
range of deformation speed |
0.001 – 600mm/min(customizable high speed test system 0.001 – 6000mm/min) |
|
12 |
precision of displacement speed |
between +/-0.2% of set value |
|
13 |
range of constant force, deformation and displacement |
0.5% -- 100%FS |
|
14 |
precision of constant force, deformation and displacement |
set value is more than 10%FS, between +/-0.5% of set value.
set value is less than 10%FS, between +/-1% of set value. |
|
15 |
stroke of transom |
0 – 1000mm/ customizable |
|
16 |
voltage |
220V+/- 10%, 50Hz (reliable landing) |
|
17 |
power |
400w |
|
18 |
size of load frame |
650*430*1750 |
|
19 |
weight |
150kg |
|
