首页 >> 新闻中心 >> 500N～300kN材料拉伸压缩蠕变持久性能试验机Materials Tensile Compressive Creep Lasting Properties Tester
500N～300kN材料拉伸压缩蠕变持久性能试验机，用于金属材料、包装用缓冲材料、木材和木基产品、橡胶泡沫塑料增强复合材料指定温度下的拉伸蠕变伸长和蠕变断裂时间、蠕变持久性能、压缩蠕变持久性能、弯曲蠕变持久性能、低周蠕变疲劳持久性能试验测试研究。测定材料蠕变强度、蠕变持久断裂时间、持久强度极限、蠕变持久断后伸长率、蠕变伸长断裂时间、蠕变伸长率、绘制材料蠕变特性曲线。
1000N拉伸蠕变持久强度试验机；hrjtest；20kN电子式蠕变持久强度试验机；30kN弯曲蠕变性能持久强度试验机；200kN高温压缩蠕变持久强度试验机；50kN合金复合材料高温拉伸试验机；300kN金属材料应力松弛试验机；10kN慢拉伸应力腐蚀松弛试验机；100kN金属材料循环疲劳试验机；100kN单轴拉伸蠕变腐蚀试验机；光滑试样拉伸蠕变持久强度试验机；300kN预应力钢材松弛试验机；钨钼钽铌难熔金属板材棒材蠕变性能试验机；V形钝形缺口蠕变持久试验机；200kN高温拉伸蠕变持久试验机；100kN金属材料蠕变应力断裂试验机；300kN复合增强材料拉伸蠕变性能试验机；hrjtest；200kN合成纤维拉伸蠕变性能试验机；100kN玻璃纤维织物拉伸蠕变性能试验机；30kN填充纤维增强塑料拉伸蠕变试验机；20kN哑铃形塑料试样拉伸蠕变试验机；塑料标称拉伸蠕变应变测试；塑料标称拉伸蠕变模量测定；30kN硬质泡沫塑料压缩蠕变试验机；50kN泡沫合成树脂压缩蠕变试验机；10kN非金属垫片材料蠕变松弛试验机；5kN硫化橡胶持续压缩蠕变试验机；10kN硫化橡胶持续剪切蠕变试验机；3kN片状包装缓冲材料蠕变试验机；5kN板状包装缓冲材料蠕变试验机；10kN块状包装缓冲材料蠕变试验机；50kN木锯材荷载续时间效应试验机；hrjtest；300kN结构复合木材荷载持续蠕变试验机；100kN结构人造板荷载蠕变性能试验机；木材持续负载蠕变检验评价；工程复合木材持续负载和蠕变检验试验机；300kN实木锯材持续负载蠕变试验机；塑料全缺口蠕变FNCT试验机；3kN浸胶纱线蠕变性能试验机；20kN浸胶线绳蠕变性能试验机；50kN浸胶骨架材料蠕变性能试验机；加热型非金属密封材料蠕变松弛试验机；非金属密封材料蠕变松弛率试验机；玻璃纤维增强塑料板材弯曲蠕变试验机；塑料蜂窝夹层结构弯曲蠕变试验机；GB/T2039-2012金属材料单轴拉伸蠕变试验方法；hrjtest；JJG 276高温蠕变持久强度试验机检定规程；静力单轴试验机的检验；拉力蠕变试验机施加力的检验；jnshiyanji；JB/T9373-2014拉力蠕变试验机技术条件；JB/T12276-2015电子蠕变松弛持久试验机；YS/T1266-2018难熔金属板材和棒材蠕变性能试验方法；GB/T228.2-2015金属材料高温试验方法；GB/T25827高温合金板带材通用技术条件；hrjtest；GJB 150.3A军用设备实验室高温环境试验方法；GJB 6458.19火箭炮高温试验；HB 5150金属高温拉伸持久试验方法；HB 5151金属高温拉伸蠕变实验方法；HB 5195金属高温拉伸试验方法；FZ/T 60037-2013膜结构用涂层织物拉伸蠕变性能试验方法；GB/T11546.1-2008塑料蠕变性能的测定拉伸蠕变；GB/T15048硬质泡沫塑料压缩蠕变试验方法；jnshiyanji；GB/T20671.5-2006垫片材料蠕变松弛率试验方法；GB/T20672-2006硬质泡沫塑料在规定负荷和温度条件下压缩蠕变的测定；GB/T19242-2003硫化橡胶在压缩或剪切状态下蠕变的测定；T/CECS 534-2018非渗油蠕变橡胶防水涂料应用技术规程；GB/T 14745-2017包装用缓冲材料蠕变特性试验方法；hrjtest；GB/T22077-2008架空导线蠕变试验方法；GB/T30710-2014层压复合垫片材料蠕变松弛率试验方法；GB/T31291-2014木材和木基产品的荷载持续时间效应和蠕变性能评定；GB/T50329 木结构试验方法标准；LY/T1975-2011木材和工程复合木材的持续负载和蠕变影响评定；GB/T32682-2016塑料聚乙烯环境应力开裂ESC的测定；GB/T32983-2016建筑用绝热制品压缩蠕变性能的测定；GB/T37564-2019浸胶帘线蠕变性能试验方法；JC/T 2312-2015非金属密封材料用蠕变松弛率试验机；JC/T778-2010玻璃纤维增强塑料板材和蜂窝夹层结构弯曲蠕变试验方法；ISO 286-2；ISO 377；ISO 23718；ISO 9513；ISO 204；ISO 6892-2-2011；IEC 584-3；IEC60584-1；IEC60584-2；ASTM E1012-2014；ASTM E139；ASTM E21-05；ASTM E8M-08；BS EN10002-5；DIN EN ISO 7500-2；ISO 8013；ISO 899-1；ISO 7850-86；ISO 16572；ISO 16770；GB/T8170；GB/T16839.1；GB/T16839.2；GB/T4989；JJG 141；JJG 351；JJG 617；GB/T16825.2-2018；GB/T11158；SH/T3423-2011；GB/T2035-2008；jnshiyanji；JJG 874-2007；GB/T2975；GB/T10623；GB/T12160；
Materials Tensile Compressive Creep Lasting Properties Tester；High Temperature Tensile Compressive Creep Testing Machine；Tension Creep Rupture Strength Testing Machine；Verification Regulation of High-Temperature Creep and Stress Rupture Testing Machines；Metallic materials Uniaxial creep testing method in tension；hrjtest；Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application；Verification of static uniaxial testing machines；Tension creep testing machines-Verification of the applied force；Tensile creep testing machines Specification；Electronic creep relaxation and stress-rupture strength testing machine；Metallic materials Tensile testing；Method of test at elevated temperature；General specification of superalloy plates and strips；Laboratory environmental test methods for military material High temperature test；Test methods of rocket launcher High temperature test；hrjtest；Standard Test Methods for Conducting Creep ；Creep-Rupture and Stress-Rupture Tests of Metallic Materials；Standard Test Methods for Elevated Temperature Tension Test of Metallic Materials；Standard Test Methods for Tension Testing of Metallic Materials；hrjtest；Specifications for high temperature test chambers；Coated fabrics for membrane structures-Test method for tensile creep；Plastic Tensile creep -Determination of creep behaviour；Cellular plastics rigid Determination of compressive creep；Rubber vulcanized-Determination of creep in compression or shear；Test method of creep properties for package cushioning material；Standard for evaluation of duration of load and creep effects of wood and wood-based products；Standard for evaluation of duration of load and creep effects of wood and wood-based products；Plastics Determination of environment stress cracking (ESC) of polyethylene；Full-notch creep test (FNCT)；Timber structures Wood based panels Test methods for structural properties；Test method of creep performance for dipped cords；Creep relaxation test machine for nonmetallic sealing material；Test method for flexural creep of glass fibre reinforced plastics sheet and sandwich construction with honeycomb core；
|
