首页 >> 新闻中心 >> 1000kN微机控制电液伺服万能试验机Electro-hydraulic Servo Universal Testing Machine
1000kN微机控制电液伺服万能试验机，经山东省计量科学研究院检验检测评定，测力系统示值相对误差0.24％，示值重复性相对误差0.10％，示值进回程相对误差0.11％。变形测量系统相对分辨力0.1μmm。应力速率相对误差0.4％，应力保持相对误差0.6％，应变速率相对误差0.5％，应变保持相对误差0.4％。恒瑞金生产的0.5级电液伺服万能试验机，各项指标均优于GB/T16826规定要求。
恒瑞金1000kN微机控制电液伺服万能试验机，球面调心机构，自动调整试样受力轴线与试验机中心线重合精准度，保证试样上下对中性、保证拉伸试样无侧向力影响、保证拉伸试样断中率。六柱丝杠结构，高刚性、高稳定性、无振动冲击流线型载荷机架。钢筋试样平行放入，快速拉伸。HRJ-Test微机镶嵌一体化静音型伺服油源泵站。300kN600kN微机控制电液伺服万能试验机；2000kN无振动伺服万能材料试验机；1000kN钢筋机械连接拉伸试验机；600kN钢绞线钢材双位拉伸试验机；hrjtest；SWLT-5全自动钢筋称重测长仪；300kN金属材料拉伸应力松弛试验机；1000kN钢筋灌浆套筒连接件反复拉压试验机；5000kN高强螺栓拉伸强度试验机；jnshiyanji；600kN卧式万能拉力试验机；40mm全自动钢筋正反向弯曲试验机；
ISO 6892-1；ISO 6892-2；ISO 20032；ISO 7348；ISO 23718；ISO 6935-1；ISO 6935-2；ISO 8491；ISO 8492；ISO 8493；ISO 8496；ISO 377:2017；ISO 1099；ISO 376；ISO 26203-2；ISO 15630-3；ASTM E8M-04；ASTM E9-89a；ASTM E111；ASTM E1875；BS EN 10002-1；JIS G0601；GB/T21839-2019；GB/T246-2017；GB/T2975-2018；GB/T30069.2-2016；GB/T228.1-2010；GB/T228.2-2015；HRJ Tester；GB/T7314-2017E；GB/T1499.1-2017；GB/T1499.2-2018；GB/T13788-2017；hrjtest；GB/T232；GB/T242；GB/T244；GB/T10623；GB/T3098.1-2015；GB/T13634；GB/T3075；GB/T15248；GB/T3091-2015；GB/T32468-2015；GB/T32976-2016；JB/T9397-2013；GB/T6396；GB/T25048；GB/T22315；JGJ/T27-2014；GB/T6525-2019；GB/T34505-2017；GB/T24172；hrjtest；YS/T542；YS/T485；YS/T550；YB/T4503-2015；JGJ107-2016；GB/T5223.3-2017；GB/T28900-2012；GB/T20065-2016；JJG 1063-2010；JG/T398-2019；
Electro-hydraulic Servo Universal Testing Machine；High Temperature Hydraulic Universal Tester；High Temperature Tensile Strength Tester；hrjtest；Steel bars Weight Length Tester；Rebar mechanical splicing Tensile Tester；Steel Strand Steel Bars Integration Tensile Tester；Metallic materials Tensile testing；Method of test at elevated temperature；Method for evaluation of tensile properties of metallic super plastic materials；Standard Test Methods for Tension Testing of Metallic Materials；Compression Testing of Metallic Materials at Room Temperature；Metallic materials Compression testing at ambient temperature；Determination of compression strength for sintered metal materials at room temperature；jnshiyanji；Metallic materials Bend tester；Metallic materials Mechanical testing；Steel for the reinforcement of concrete；Hot rolled ribbed bars Tester；Cold rolled ribbed steel wires and bars Tester；Standard for test methods of welded joint of reinforcing steel bars；Metallic materials Tube Bend tester；Metal materials Tube Flattening tester；Metallic materials Tube Ring tensile test；Determination of modulus of elasticity and poissons ratio；Tubes Transverse bending tester；hrjtest；Tube Drift expending test；Location and preparation of samples and test pieces for mechanical testing；Welded steel pipes for low pressure liquid delivery；Calibration of force-proving instruments used for the verification of uniaxlial testing machines；Metallic materials Tensile testing at high strain rates；Servo-hydraulic and other test systems；Metallic materials Fatigue testing Axial force controlled method；hrjtest；The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials；Clad steel plates-Mechanical and technological test；Copper clad aluminum plate sheets and strips；Thermal sprayed coatings Determination of tensile strength；Sintered bimetal material shear strength；HRJ Tester；Thermal sprayed metallic coatings shear strength；Three-Position Materials Bending Tester；Mechanical properties of fasteners；Bolts screws and studs Tester；hrjtest；Technical specification for mechanical splicing of steel reinforcing bars；Slip test method；Repeated Tension Compression Fatigue Tester for Grout Sleeve Splicing of Rebars；Grouting Sleeve Strength Tester；No Vibration Rebar Mechanical Splicing Tensile Tester；No Vibration Servo Universal Materials Tester；Fully Automatic Steel Bar Repeated Bending Tester；
|
