首頁 >> 試驗機案例 >> 300kN結構木材四點彎曲強度試驗機Structural Timber Characterization Bending Strength Test
300kN結構木材四點彎曲強度試驗用于測試木材抗彎曲力、抗彎曲強度和彈性模量。采用四點加載，依據AS/NZS4063.1-2010，完成木結構部件、框架部件、LVL層積木、PSL平行積成木、膠合層積木、規格材、原木材等抗彎曲能力測試。
 300kN結構木材四點彎曲強度試驗機；300kN結構木材彎曲彈性模量試驗機；hrjtest；300kN結構木材部件強度試驗機；300kN層積木規格材強度試驗機；300kN原木材彎曲力強度試驗機；300kN結構木材接縫抗剪強度試驗機；hrjtest；300kN結構木材拉伸抗壓承載力試驗機；45*95mm規格材拉伸試驗機；2"x4"規格材試驗機；AS/NZS木材特性測試控軟件；規格材材質等級檢驗方法；木結構試驗方法；木材強度等級檢驗方法；建築結構荷載規範；hrjtest；受彎木結構力學性能檢驗方法；木基結構板材力學性能指標；集成材理化性能試驗方法；木結構工程施工質量驗收規範；膠合木結構技術規範；建築工程方木原木結構設計；建築工程輕型木結構設計；原木及板材材質標准；建築工程承重膠合木結構設計；原木鋸材批量檢查抽樣判定方法；多高層木結構建築技術標准；裝配式木結構建築技術標准；輕型木結構用指接規格材；輕型木結構連接件通用技術條件；輕型木結構鋸材用原木檢驗；hrjtest；輕型木桁架技術規範；1000kN木結構力學試驗機；200kN長木材強度試驗機；200kN集成材力學試驗機；500kN木板材力學試驗機；100kN木板材試驗機；10kN人造板試驗機；120kN長試樣人造板大跨度試驗機；10kN電子式人造板試驗機；MHH-5N人造板劃痕試驗機；MGL-5N人造板滾動磨損試驗機；5J人造板沖擊試驗機；300kN結構木材集成材力學特性試驗機；150N.m防火門啓閉可靠性試驗機；150N.m閉門器靈活性試驗機；20kN防火板萬能力學試驗機；2kN石膏板斷裂荷載硬度試驗機；20kN門窗型材角強度試驗機；1000mm1500mm門窗型材落錘沖擊試驗機；MJL-10紙面石膏板沖擊性能測定儀；AS/NZS 4063.1:2010；AS/NZS 4357.2；ISO 1033-1；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；hrjtest；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294：2011；ASTM D5055-2013；ASTM D3528；NF B51-127-19；ASTM D5456-2010a；APA EWS S550-2005；hrjtest；BS EN 1912：2012；
Structural Timber Characterization Bending Strength Tester；Test Set-up Measuring Bending Strength and Apparent Modulus of Elasticity；Structural Timber Characterization Loading Tester；Dimension Lumber Characterization Tester； Stress-graded Timber Tester；hrjtest；Characterization of structural timber Tester；Tension Strength Parallel to Grain；Compression Strength Parallel to Grain；Beam Shear Strength；Bearing Strength Perpendicular to Grain；Bearing Strength Parallel to Grain；Modulus of Rigidity in Torsion；Tension Strength Perpendicular to Grain；Compression Strength and Modulus of Elasticity Perpendicular to Grain；Shear Strength at Joint Details；Testing Rectangular Sections of Sawn Solid Timber；hrjtest；Structural laminated veneer lumber (LVL) Tester；Determination of modulus of elasticity in bending and of bending strength；hrjtest；Determination of structural properties Tester；Determination of mechanical properties of wood based panels；Plywood Bonding quality Tester；Determination of tensile strength perpendicular to the plane of the board；Sampling and cutting of test pieces and expression of test results；Tester of evaluating the properties of glued-laminated timber；Visual grading rules for dimension lumber in light wood frame construction；Code for design of timber structures；Load code for the design of building structures；Code for acceptance of construction quality of timber structures；Technical code of glude laminated timber structures；Log for lumber in light wood frame construction；Finger jointed structural dimension lumber in light wood frame construction；General specification for connector of light wood-frame construction；Code for construction of timber structures；Technical code for light wood trusses；Sampling and judging methods for lot inspection of logs；Sampling and judging methods for lot inspection of sawn timbers；Standard for methods testing of timber structures；Tension Strength Hydraulically Operated Fixture；
|
