首頁 >> 試驗機案例 >> 100N.m5000N浮動油封跑合磨損泄漏性能試驗機Floating Ring Seal Abrasion Tester
100N.m5000N浮動油封跑合磨損泄漏性能試驗機，用于過程流體動力學研究，流體機械密封結構力學研究，流體設備旋轉接頭密封材料研究，流體潤滑理論研究。指導流體機械密封結構設計，石油化工流體攪拌機械裝備研究設計，壓力容器密封技術設計。測試浮封環組件在轉動過程中的摩擦磨損狀況，研究驗證浮封環可靠性能，驗證浮封環耐久性能。Hrjtest；在注入潤滑油的狀態下實現相對轉動，模擬油氣水、粉塵、黏土砂粒等實際工況，浮封環潤滑油滴漏狀況實時監控，浮封環試驗溫度實時監測，浮封環實際使用工況4倍～5倍強化試驗測定，浮封環軸向加載性能試驗，浮封環角度偏移加載試驗，浮封環偏軸偏移加載，浮封環角度偏移加載和偏軸偏移加載組合試驗。繪制浮封環溫度-時間曲線、扭矩-時間曲線。
 JB/T8293-2014浮動油封；GB/T14211-2019機械密封試驗方法；JB/T6619.2-2018輕型機械密封試驗方法；30kN密封件疲勞試驗機系統；10kN浮封靜態密封性能試驗機；30kN浮封抗壓荷載試驗機；5000h浮動油封磨損疲勞壽命試驗機；100N.m端面密封動態跑合性能試驗機；GB/T24795.2-2011；GB/T30911-2014；GB/T31330-2014；GB/T10708.2；GB/T27800-2011；GB/T34028-2017；JB/T6619.2-2018；GB/T21283.4-2008；GB/T11023-2018；GB/T37995-2019；GB/T36879-2018；GB/T37210-2018；GB/T27572-2011；GB/T33154-2016；GB/T10708.1；GB/T27568-2011；GB/T23658-2009；GB/T25364.2-2010；MT/T784-2011；YS/T60-2019；ISO 16589-4；ISO 23711；ISO 4635；ISO 9553；hrjtest；MT/T1164-2011；MT/T1165-2011；hrjtest；MT/T985；HG/T3326；HG/T3096-2011；GB/T23662；GB/T10708.3；GB/T13871.4；GB/T28604-2012；JB/T8872-2016；JB/T11959-2014；JB/T7369-2011；JC/T2402-2017；TB/T3419-2015；TB/T3102.4；TB/T3103.2；MT/T580；MT/T985；NB/T20478.1-2018；NB/T20478.2-2018；HG/T2810；HG/T3326；ISO 16589-4；工程機械行走部件浮封動態密封試驗；端面浮封動態密封試驗；采煤機輕型機械密封運轉試驗；旋轉轉動軸密封運轉型式試驗；平地機裝載機浮封動態密封試驗；DO型浮封動態密封性能試驗；浮動油封1500h強化工作壽命強化試驗；5kN密封件疲勞試驗系統；￠50～608mm浮動油封跑合磨損泄漏性能試驗機；10000N橡膠密封摩擦磨損試驗機；支重輪浮封動態密封性能試驗；10kN浮封環面壓靜壓荷載試驗機；唇形密封圈動態性能試驗機；支重輪對跑合磨損試驗機；齒輪箱磨合磨損泄漏性能試驗機；5000N填料密封件疲勞試驗機；椎間融合器生物力學性能試驗機；10kN聚合物複合材料拉拉疲勞試驗機；500N密封膠拉伸疲勞試驗機；50kN鋁型材疲勞性能試驗機；100kN彈性墊層疲勞試驗機；100kN4000Nm密封圈高低溫壓扭疲勞試驗機；10kN橡塑高分子材料拉壓疲勞試驗機；掘進機盤形滾刀摩擦磨損疲勞壽命試驗機；5000N橡膠伸張疲勞試驗機；
Floating Ring Seal Abrasion Testing Machine；Floating Seal Running Wear Leakage Performance Tester；Floating Ring Seal Friction Wear Tester；Elastomeric Seals Friction Wear Tester；Mechanical Seal Friction Wear Tester；hrjtest；Mechanical Seal Element Running Wear Tester；Rubber Seal Friction Wear Tester；Rotary shaft lip seals Tester；Double Seal Friction Wear Tester；Running Attrition Tester；Seal Ring Compression Molding Tester；hrjtest；Reciprocating rubber seals；Design criteria for standard applications；Rubber seals of act on double seal；Turbocharger seal rings Test method；Specification for carbon-graphite sealing ring for mechanical seals；Blanks for cemented carbide sealing ring；Compounds of reciprocating rubber seals；Rubber seals used for full face tunnel boring machine；Rubber ring of main drive chain for wind turbine generator system；Recirculating ball power steering lips seals；Valve stem reciprocating seals of engine and performance test method；Test method of SF6 gas tightness；Requirements for materials for pipe joint seals；Resistant inflatable and water filled rubber sealing products；Sealing Ring High Low Temperature Compressive Torsion Fatigue Tester；Caterpillar Band Sealing Ring Fatigue Durability Life Tester；
|
