首頁 >> 試驗機案例 >> JG/T 503-2016承插型盤扣式鋼管支架構件連接盤雙側彎剪強度試驗Double Shear Strength Test
JG/T503-2016承插型盤扣式鋼管支架構件連接盤雙側彎剪強度試驗：對Z型産品連接盤部位雙側加載，第1次加載由0kN加至6kN後卸載；第2次加載由0kN加載至21kN持荷2min，連接盤各部位不應破壞。對B型産品連接盤部位雙側加載，第1次加載由0kN加載至4kN後卸載；第2次加載由0kN加載至14kN持荷2min，試件各部位不應破壞。
200kN盤扣式鋼管支架構件試驗機，測試腳手架連接盤單側抗剪強度、連接盤雙側抗剪強度、雙側彎剪強度、連接盤抗彎強度、連接盤抗拉強度、連接盤內側環焊縫抗剪強度、可調托撐和可調底座抗壓強度試驗；60.3mm盤扣式腳手架試驗機；jnshiyanji；48.3mm承插型腳手架試驗機；PKJ承插型盤扣式鋼管支架構件試驗機；100kN鋼管腳手架扣件試驗機；120kN碗扣式鋼管腳手架構件試驗機；300kN門式鋼管腳手架試驗機；腳手架上碗扣強度試驗、下碗扣焊接強度試驗、橫杆接頭強度試驗、橫杆接頭焊接強度試驗、KDZ可調支座抗壓強度試驗；hrjtest；腳手架直角扣件抗滑性能試驗、抗破壞性能試驗、扭轉剛度性能試驗，旋轉扣件抗滑性能試驗、抗破壞性能試驗，對接扣件抗拉性能試驗，底座抗壓性能試驗；彎曲試驗力-位移曲線；200kN重型鋼管支架強度試驗機；輕型鋼管支架強度試驗機；33.7mm鋼管支架力學強度試驗機；38mm鋼管支架強度試驗機；42.4mm鋼管支架力學試驗機；EN 74；DIN 39；BS 1139；GB 15831；GB24911；jnshiyanji；JGJ231；JG/T503-2016；JGJ130-2011；GJ166-2016；GB/T3091-2015；JC/T2287-2014；DL/T1209.4-2014；JGJ128-2010；GB 24910；CB 4204-2012；SH/T3555-2014；
Connect Plate Double Shear Strength Test；Scaffolding Connect Plate Shear Strength Tester；Steel Tube Scaffold Couplers Tester；Bowl-coupler Type Steel Tube Scaffolding Member Tester；Disk Lock Steel Tubular Scaffold Components Tester；Tubular Steel Frame Scaffolding Tester；Door-type Steel Pipe Scaffolding Tester；Bend Test Force-Displacement Curve；hrjtest；Scaffolding couplers Tester；Metal Scaffolding Tester；jnshiyanji；Frame Scaffolding Tester；right angle coupler test；swivel coupler test；sleeve coupler test；base-plate test；U-jack test；coupler joint test；standing tube test；crown tube test；slanting support test；supports test；jack support test；Steel tube scaffold couplers；disk lock steel tubular scaffold in construction；hrjtest；steel tubular scaffold with couplers in construction；frame scaffoldings with Buckles Bowl in construction；Welded steel pipes for low pressure liquid delivery；germane version；hrjtest；Loose steel tubes；tube and coupler scaffolds-Technical delivery conditions；Couplers spigot pins and base plates；use in false work and scaffolds；hrjtest；Special couplers-Requirements and test procedures；quick-erectable mobile scaffolding；prefabricated elements；Specifications for substation ascending operation and protective device；composite quick-installed scaffold；safety of frame scaffoldings with steel tubules in construction；Technical specification for construction safety；steel scaffold building in petrochemical industry；tubes-Requirements and test procedures；Steel plate punched coupler；
濟南恒瑞金試驗機有限公司；鋼管腳手架構件強度試驗機；力值硬度計量專業委員
（試驗機服務中心）（試驗機配件供應中心）（特殊夾具定制中心）
|
