|
|
 |
| |
首頁 >> 新聞中心 >> 無疵小試樣木材物理力學性質試驗方法Test methods for physical and mechanical properties of small clear wood specimens
GB/T1927無疵小試樣木材物理力學性質試驗方法，描述了無疵小試樣木材物理力學性質試驗方法中試材采集地設置和樣木選擇、樣木采伐、試材截取和記載，以及試材編號和運輸，木材各項物理力學性能的試驗。
GB/T1927.1-2021試材采集；GB/T1927.2-2021取樣方法和一般要求；GB/T1927.3-2021生長輪寬度和晚材率測定；GB/T1927.4-2021含水率測定；GB/T1927.5-2021密度測定；GB/T1927.6-2021幹縮性測定；GB/T1927.7-2021無吸水性測定；GB/T1927.8-2021濕脹性測定GB/T1927.9-2021抗彎強度測定；hrjtest；GB/T1927.10-2021抗彎彈性模量測定；GB/T1927.11-2022順紋抗壓強度測定；hrjtest；GB/T1927.12-2021橫紋抗壓強度測定；GB/T1927.13-2022橫紋抗壓彈性模量測定；GB/T1927.14-2022順紋抗拉強度測定；hrjtest；GB/T1927.15-2022橫紋抗拉強度測定；GB/T1927.16-2022順紋抗剪強度測定；GB/T1927.17-2021沖擊韌性測定；hrjtest；GB/T1927.18-2021抗沖擊壓痕測定；GB/T1927.19-2021硬度測定；GB/T1927.20-2021抗劈力測定；GB/T1927.21-2022握釘力測定；GB/T1927-2009作廢；GB/T1928-2009作廢；hrjtest；GB/T1929-2009作廢；GB/T1930-2009作廢；GB/T1931-2009作廢；GB/T1932-2009作廢；GB/T1933-2009作廢；GB/T1934.1-2009作廢；GB/T1934.2-2009作廢；GB/T1935-2009作廢；GB/T1936.1-2009作廢；GB/T1936.2-2009作廢；GB/T1937-2009作廢；GB/T1938-2009作廢；GB/T1939-2009作廢；GB/T1940-2009作廢；GB/T1941-2009作廢；GB/T1942-2009作廢；GB/T1943-2009作廢；GB/T14017-2009作廢；GB/T14018-2009作廢；ISO 3129:2019；hrjtest；ISO 3061-13:2016;ISO 13061-14；ISO 13061-15;ISO 13061-16:2017；ISO 13061-3:2014；恒瑞金試驗機；ISO 13061-6；hrjtest；ISO 3347；ISO 13061-10；ISO 13061-11；ISO 13061-12；ISO 9087；ISO 4471；LY/T3194-2020結構用重組竹力學性能；400kN預制木質工字梁靜曲強度性能試驗機；GB/T28985-2012建築結構用木工字梁；ASTM D7199基于力學模式的增強膠合層壓木材梁建立特性值的標准實施規程；ASTM D7341-2014用足尺試驗對膠合木結構的彎曲特性建立特性值的標准實施規程；ASTM D7857-2016用于評估暴露于高溫下阻燃墊木結構複合板抗彎性能和內粘結強度的標准試驗方法；ASTM E529-04建築結構用梁和大梁彎曲試驗標准指南；ASTM D3200-74圓木電杆推薦應力標准規格和試驗方法；大跨度木質工字梁承載力靜態彎曲性試驗機；GB/T31264-2014結構用人造板力學性能試驗方法；GB/T29895-2013橫向振動法測試木質材料動態彎曲彈性模量的方法；GB/T41547-2022地采暖用木質地板；GB/T41715-2022定向刨花板；恒瑞金試驗機；LY/T3232-2020框架式實木複合地板；LY/T2485-2015梁材；單板層積材LVL結構木材抗彎強度力學性能試驗機；膠合層積板材木結構規格材彈性模量試驗機；JG/T425-2013建築施工用木工字梁；GB/T31265-2014混凝土模板用木工字梁；恒瑞金試驗機；ISO 22389-2-2020木結構工字梁組件彎曲性能和加工要求；結構用人造板刨花板木質複合材鋸材力學性能試驗機；ISO 22389-1木結構工字梁彎曲強度測試評估和表征；EN 595木結構試驗方法測定承重能力和變形特性用桁架梁試驗；KS F 3027木箱梁；KS E 2803-2013木材支撐梁支架；APA PS 1-09厚度方向抗剪強度試驗夾具；AS/NZS 4357.2結構單板層積材LVL結構性能試驗方法測定；恒瑞金試驗機；AS/NZS 4063.1結構木材的特性試驗方法；AS/NZS 4266.0人造木基板材測試方法標准；AS/NZS 4266.5彎曲強度和彎曲模量；AS/NZS 4266.6內結合強度；AS/NZS 4266.7表面結合強度；AS/NZS 4266.9膠粘質量；AS/NZS 4266.10濕彎強度；AS/NZS 4266.11循環後內結合強度和彎曲強度；AS/NZS 4266.13握螺釘力；AS/NZS 4266.27沖擊性能；AS/NZS 4266.28粘合強度；AS/NZS 2098.3彎曲強度；AS/NZS 2269.1 7.2彈性和剛性模量； GB/T31264-2014結構用人造板力學性能試驗方法；GB/T20240-2017竹集成材地板；LY/T3364-2024柔性竹塑複合材；GB/T36394-2018竹産品術語；JC/T2124-2019混凝土砌塊（磚）生産用竹膠托板；GB/T30364-2024重組竹地板；GB/T21128結構用竹木複合板；GB/T38742-2020竹砧板；GB/T41231-2021竹木刨花模壓成型托盤通用技術條件；GB/T40487-2021結構用竹集成材；GB/T37805-2019竹纏繞複合管；GB/T27649竹木複合層積地板；GB/T38071-2019結構用竹篾層積材；FZ/T13029-2024棉竹節本色布；FZ/T14012-2022竹漿粘膠纖維印染布；GB/T21129竹單板飾面人造板；SN/T0503-2018出口商品運輸包裝竹膠合板箱檢驗規程；GB/T40241-2021戶外重組竹；GB/T40247-2021重組竹；Test methods for physical and mechanical properties of small clear wood specimens；Collection of sample tree；Sampling methods and general requirements；hrjtest；Determination of the growth rings width and latewood rate of wood；Determination of moisture content；Determination of density；Part6:Determination of shrinkage；Part7:Determination of water absorption；Part8: Determination of swelling；Determination of bending strength；hrjtest；Determination of modulus of elasticity in bending；Determination of ultimate stress in compression parallel to grain；Determination of strength in compression perpendicular to grain； Determination of the modulus of elasticity in compression perpendicular to grain；Determination of tensile strength parallel to grain；Determination of tensile strength perpendicular to grain；Method of testing in shearing strength parallel to grain of wood；Determination of impact bending strength；Determination of resistance to impact indentation；Determination of static hardness；Determination of cleavage strength；Determination of nail and screw holding power；Structural bamboo scrimber Mechanical Properties Tester；Wood I-Joist Structural Capacities Static Bending Performance Tester；LVL Structural Timber Mechanical Properties Tester；
|
|
|
| |
