首頁 >> 新聞中心 >> JJF(有色金屬)0007-2021慢應變速率應力腐蝕試驗機校准規範2022-04-01實施
JJF(有色金屬)0007-2021慢應變速率應力腐蝕試驗機校准規範2022-04-01實施，規範適用于常壓下力值範圍1kN～100kN的慢應變速率應力腐蝕試驗機的校准。1kN～100kN慢拉伸慢應變速率應力腐蝕試驗機，測定金屬合金材料部件在持久慢速拉應力、慢應變工作應力、恒載荷蠕變熱應力、殘余應力和腐蝕介質聯合作用下耐腐蝕能力和環境適應能力。HRJ耐高溫耐強酸腐蝕，全密封防泄漏防揮發應力腐蝕試驗容器，300°高溫長時實驗。
1kN～100kN慢拉伸慢應變速率應力腐蝕試驗介質：硫化氫H2S、氯化鈉NaCl、冰乙酸/無水乙酸、醋酸鈉/乙酸鈉/無水醋酸鈉/無水乙酸鈉、氮氣N2、氩氣Ar、氨氣NH3、二氧化碳CO2、氫氧化鈉NaOH、硝酸鹽NO3、硫酸鹽、硫酸鋇、甲醇、四氧化二氮N2O4、硫酸銅/五水硫酸銅/CuSO4、草酸、硫酸鐵、氫氟酸、潮濕空氣、鹽霧、腐蝕性氣體、海水、鹽水、去冰鹽等。
10kN恒速率慢拉伸應力腐蝕試驗機；20kN蠕變持久拉伸應力腐蝕試驗機；50kN慢拉伸應力腐蝕疲勞試驗機；100kN滿速率腐蝕應力開裂壓縮試驗機；hrjtest；30kN慢應力腐蝕裂紋生長試驗；100kN慢拉伸應力腐蝕裂紋擴展試驗測試；50kN埋地管慢拉伸應力腐蝕試驗機；10kN黃銅蠕變持久拉伸應力腐蝕試驗機；30kN不鏽鋼慢拉伸應力腐蝕疲勞試驗機；50kN鋁合金滿速率腐蝕應力開裂試驗機；100kN海洋裝備部件慢應力腐蝕裂紋生長試驗；300kN油氣管道慢拉伸應力腐蝕裂紋擴展試驗；hrjtest；200kN武器零部件拉伸應力腐蝕試驗機；100kN航空航天部件慢拉伸應力腐蝕試驗機；100kN有毒氣體防滲漏高溫應力腐蝕試驗機；50kN金屬均勻耐腐蝕全浸試驗機；20kN點腐蝕晶間腐蝕慢應變試驗機；hrjtest；50kN縫隙腐蝕電偶腐蝕慢速率拉伸試驗機；50kN螺紋插銷式慢應變拉伸應力腐蝕試驗機；7XXX系鋁合金應力腐蝕試驗；100kN高鉻鐵素體不鏽鋼晶間腐蝕試驗方法；50kN金屬鎳合金晶間腐蝕試驗機；GB/T33883-2017；GB/T33976-2017；GB/T32571-2016；GB/T15260-2016；GB/T31933-2015模擬海洋環境鋼筋耐蝕試驗；GB/T16545-2015；GB/T22640鋁合金環形試樣應力腐蝕試驗；GB/T24518金屬合金應力腐蝕室外暴露試驗；GB/T25834鋼鐵戶外大氣加速腐蝕試驗；GB/T20122金屬合金滴落蒸發試驗應力腐蝕開裂；GB/T28416-2012腐蝕氣體中性鹽霧及幹燥環境加速腐蝕試驗；GB/T9711.3；GB/T4157金屬在硫化氫環境中抗特殊開裂試驗；GB/T4334不鏽鋼晶間腐蝕試驗方法；GB/T4334.6-2015不鏽鋼5%硫酸腐蝕試驗；GB/T15970.3；GB/T15970.6；GB/T15970.7；GB/T15970.8；GB/T15970.9；GB/T25996奧氏體不鏽鋼外部應力腐蝕開裂試驗；GB/T20972.3硫化氫環境材料抗開裂耐蝕試驗；GB/T10127不鏽鋼三氧化鐵縫隙腐蝕試驗；GB/T10567.2銅合金加工材殘余應力檢驗；hrjtest；YB/T5362不鏽鋼在沸騰氯化鎂溶液中應力腐蝕試驗；YB/T5344鐵鉻鎳合金在高溫水中應力腐蝕試驗；SY/T0087.4-2016；SY/T7348-2016埋地鋼質管道應力腐蝕開裂試驗；MH/T6072-2011钛合金應力腐蝕試驗；YS/T814黃銅制成品應力腐蝕試驗；HB7235；ISO 8044-2015；EN 14977；ISO 6957；DIN 50919-2016；ISO 7441-2015；ISO 18089-2015；ISO 18070-2015；ISO 16540-2015；EN 14038-1-2016；NACE RP0204；ISO 7539；ISO 15156.2；NACE TM0177；NACE TM0284；NACE MR0175；ASTM G31-72；ASTM G39；JJF(機械)1064-2021運動場地材料沖擊吸收和垂直變形試驗機校准規範；JJF(建材)146-2018道路車輛制動襯片摩擦性能拖曳試驗機校准規範；JJF(建材)147-2018小樣縮比慣性摩擦磨損性能試驗機校准規範；JJF(建材)166-2020斜坡法陶瓷磚防滑試驗機校准規範；JJF(建材)181-2021制動襯片壓縮熱膨脹試驗機校准規範；JJF(建材)184-2021塑料管材耐壓爆破試驗機校准規範；JJF(建材)186-2021智能坐便器壽命試驗機校准規範；
Slow Strain Rate Stress Corrosion Tester；Slow Tension Stress Corrosion Testing Machine；Corrosion of metals and alloys Corrosion test；intergranular corrosion susceptibility of high-Cr ferritic stainless steels；intergranular corrosion of nickel alloys；the corrosion of steel bar embedded in concrete in chloride enviroment；Removal of corrosion products from corrosion test specimens；corrosion cracking for aluminium alloys products；C Ring sample to stress；stress corrosion cracking in outdoor environments；Accelerate corrosion testing of iron and steel in outdoor atmospheres；Evaluation of stress corrosion cracking by the drop evaporation test；Corrosion tests in artificial atmospheres；Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases neutral salt-spray and drying；Laboratory testing of metals for resistance；specific forms of environmental cracking in H2S environments；stainless steels in 5% sulfuric acid；thermal insulations on external stress corrosion cracking of austenitic stainless steel；Petroleum and natural gas industries Material for use in H2S-containing environments in oil and gas production；Stainless steels Method of ferric chloride crevice corrosion test；Cracking-resistant CRAs and other alloys； Wrought copper and copper alloys-Detection of residual stress-Ammonia test；cracking resistance of stainless steels in a boiling magnesium chloride solution；Fe-Cr-Ni alloys-stress corrosion test in high temperature water；Test method for stress corrosion resistance of brass finished products；
|
