首頁 >> 新聞中心 >> HRJ結構木材集成材拉壓扭剪特性測控軟件Structural Timber Characterization Tester
HRJ結構木材集成材拉壓扭剪特性測控軟件，測定木結構部件拉伸性能、框架部件拉伸性能、LVL層積木拉伸性能、PSL平行積成木拉伸性能、膠合層積木拉伸性能、規格材拉伸性能、原木材拉伸性能。hrjtest；測定木結構部件壓縮性能、木結構部件扭轉特性、木結構部件抗剪性能。
300kN結構木材特性試驗機測試木材順紋抗拉強度、橫紋抗拉強度、順紋抗壓強度和彈性模量、木材順紋抗剪強度、接縫抗剪強度、木材彎曲強度和彈性模量。測試木材垂直抗壓承載力、木材抗拉承載力、木材橫向承載力、木材扭轉剛度。300kN結構木材拉伸試驗采用液壓夾具自動夾持，高剛性、高穩定性、無振動沖擊流線型臥式荷載機架，大于1.2倍木材試驗荷載剛度；高強度可視安全防護網；
AS/NZS 4063.1:2010；AS/NZS 4357.2；ISO 1033-1；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；hrjtest；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294：2011；ASTM D5055-2013；ASTM D3528；NF B51-127-19；ASTM D5456-2010a；APA EWS S550-2005；BS EN 1912：2012；GB 50005-2017；hrjtest；GB 50009-2012；GB 50206-2012；GB/T26899-2011；GB/T17659.1-2018；hrjtest；GB/T17659.2-2018；GB/T29893-2013；GB/T29897-2013；GB/T50329-2012；GB/T50708-2012；GB/T50772-2012；GB/T51233-2016；GB/T51226-2017；LY/T1927-2010；LY/T2228-2013；LY/T2388-2014；JGJ/T265-2012；
規格材材質等級檢驗方法；木結構試驗方法；木材強度等級檢驗方法；建築結構荷載規範；受彎木結構力學性能檢驗方法；木基結構板材力學性能指標；jnshiyanji；集成材理化性能試驗方法；木結構工程施工質量驗收規範；膠合木結構技術規範；規格材目測分級規則；木結構設計標准；建築工程方木原木結構設計；建築工程輕型木結構設計；原木及板材材質標准；建築工程承重膠合木結構設計；原木鋸材批量檢查抽樣判定方法；多高層木結構建築技術標准；裝配式木結構建築技術標准；輕型木結構用指接規格材；輕型木結構連接件通用技術條件；輕型木結構鋸材用原木檢驗；hrjtest；輕型木桁架技術規範；應力分級木材；300kN規格材特性試驗機；300kN木結構彎曲強度試驗機；300kN結構木材抗剪強度試驗機；600kN木結構力學性能試驗機；jnshiyanji；100kN長試件木材強度試驗機；120kN大跨度木材力學試驗機；200kN集成材力學性能試驗機；600kN原木板材力學試驗機；1000kN木結構荷載強度試驗機；
Structural Timber Characterization Tester；hrjtest；Dimension Lumber Characterization Tester；Characterization of structural timber-Test methods；Stress-graded Timber；Bending Strength and Apparent Modulus of Elasticity；Tension Strength Parallel to Grain；Compression Strength Parallel to Grain；Beam Shear Strength；Bearing Strength Perpendicular to Grain；Bearing Strength Parallel to Grain；Modulus of Rigidity in Torsion；Tension Strength Perpendicular to Grain；Compression Strength and Modulus of Elasticity Perpendicular to Grain；Shear Strength at Joint Details；Testing Rectangular Sections of Sawn Solid Timber；Structural laminated veneer lumber (LVL) Test methods；Determination of structural properties-Test methods；Determination of mechanical properties of wood based panels；Determination of modulus of elasticity in bending and of bending strength；Plywood Bonding quality Test methods；Determination of tensile strength perpendicular to the plane of the board；Sampling and cutting of test pieces and expression of test results；Test method of evaluating the properties of glued-laminated timber；hrjtest；Code for design of timber structures；
http://www.jnshiyanji.com/Show_Pic_cn.asp?id=4952&Menuid=159&Columnid=11；Visual grading rules for dimension lumber in light wood frame construction；Load code for the design of building structures；Code for acceptance of construction quality of timber structures；Technical code of glude laminated timber structures；Finger jointed structural dimension lumber in light wood frame construction；General specification for connector of light wood-frame construction；Log for lumber in light wood frame construction；jnshiyanji；Code for construction of timber structures；Technical code for light wood trusses；Sampling and judging methods for lot inspection of logs；Sampling and judging methods for lot inspection of sawn timbers；Tension Strength Hydraulically Operated Fixture；Standard for methods testing of timber structures；
濟南恒瑞金試驗機有限公司；結構木材特性試驗機；山東省力值硬度計量委員
（試驗機服務中心）（試驗機配件供應中心）（特殊夾具定制中心）
|
