首頁 >> 新聞中心 >> 鋼筋重量偏差測量儀Steel bars Weight Length Tester
GB/T1499.2-2018規定，測量鋼筋重量偏差，數量不少于5支，每支鋼筋試件長度不小于500mm，長度應逐支測量，精確到1mm。測量鋼筋試樣總重量時，應精確到不大于總重量1％。
SWLT-5全自動鋼筋稱重測長儀，自動完成鋼筋重量偏差測量和鋼筋長度偏差測量，自動測量每支鋼筋試件重量和長度，自動計算鋼筋總重量、自動計算鋼筋實際重量與理論重量偏差；滿足GB/T1499.2-2018要求。
￠3mm～50mm鋼筋稱重測長；熱軋帶肋鋼筋稱重測長；光圓鋼筋稱重測長；直條鋼筋稱重測長；盤圓鋼筋稱重測長；HPB300鋼筋稱重測長；hrjtest.com；HRB400/HRB500鋼筋稱重測長；HRB600鋼筋稱重測長；HRBF400/HRBF500鋼筋稱重測長；CRB550鋼筋稱重測長；CTB550/CTB650鋼筋稱重測長；抗震鋼筋稱重測長；冷軋鋼筋稱重測長；500mm鋼筋重量偏差測量；500mm鋼筋長度偏差測量；750mm鋼筋重量偏差測量；750mm鋼筋長度偏差測量；鋼筋實際重量與理論重量偏差；鋼筋試件實際長度偏差；鋼筋稱重分辨力≤0.001kg；移動式鋼筋稱重測長；hrjtest.com；臥式鋼筋稱重測長；稱重測長數據聯網管理；混凝土結構工程施工質量規範；混凝土鋼筋焊接網；混凝土耐蝕鋼筋試驗；混凝土不鏽鋼鋼筋測試；預應力螺紋鋼筋檢驗；混凝土余熱處理鋼筋測量；混凝土環氧塗層鋼筋測量；
Steel bars Weight Length Tester；Hot rolled plain bars Test；Hot rolled ribbed bars Test；Steel for the reinforcement of concrete；Welded fabric Test；Steel for the reinforcement of concrete；Cold rolled ribbed steel wires and bars；Screw-thread steel bars Test；GB/T1499.1-2017；GB/T33953-2017；GB/T33959-2017； GB/T25826；hrjtest.com；JGJ/T27-2014；ISO6935-3；ISO 7348；BS 4449；DIN 488-1； Quenching and self-tempering ribbed bars for the reinforcement of concrete；Specification for welding and acceptance of reinforcing steel bars；GB 50204-2015；Hydraulic universal Tester；Servo Universal Tester；GB/T1499.3；GB/T13788-2017；Explosion proof Tester；Steel Strand Tensile Tester；Integration Tensile Tester；Steel bar Bending Tester；Three-Position Steel bar Bending Test；JIS G 3112；CNS 560；Metal Materials Bending Test；Steel Bar Bend and Rebend Test；jnshiyanji.com；Steel Pipes Bending Test；Metal materials-Tube Bending Test；Servo Materials Bending Tester；Steel Rails Bending Test；Electronic Universal Tester；Torsion Tester；GB/T20065-2016；GB/T13014-2013；Spring Tester；High-speed Tester；Low speed test System；Hydraulic Jack verification System；Jack Multi-functional Test System；Hydraulic Compression Tester；GJ 18-2012；ISO 10065；Steel strand relaxation Tester；Static Load Anchoring Tester；Tension Creep Rupture Strength Tester；ASTM 615-07；AS-NZS 4671；Standard Machine；Horizontal Tension Tester；hrjtest.com；Hydraulic Universal Tester；Wood Tester；Artificial board Tester；Bending Tester；Dynamic Fatigue Testing System；Special Tester；Special Custom Tester Non-Standard Tester；ISO6935-1；ISO6935-2；China Material Tester；Asia Material Tester；International Type Material Tester；Testing Machine Manufacturer；Mechanics Tester Manufacturer；Testing Machine Service Center；Tester Fittings Supply Center；Design and Manufacture Center；Special Test Accessories；Shandong Society For Measurement；Jinan HengRuiJin Testing Machine Co.,Ltd.
山東省計量測試學會力值硬度計量專業委員會委員濟南恒瑞金試驗機有限公司
（試驗機服務中心）（試驗機配件供應中心）（特殊夾具定制中心）
|
