Homepage >> Products >> WAW Series Electrohydraulic Servo Universal Tester >> WAW-300B/600B/1000B Microcomputer Control Electro-hydraulic Servo Universal Testing Machine
WAW Series
Microcomputer Control Electro-hydraulic
Servo Universal Testing Machine
Ⅰ. Main function &features:
1.This series machine adopt microcomputer control full digital broadband electro-hydraulic servo valve to drive high precision hydraulic cylinder, auto control to test force, displacement, deformation, and finish tension, compression, bending test. This series machine comply with national standard GB/T228-2002 Method of Tensile Test of Metallic Materials At Room Temperature and GB/T3159-92 Hydraulic Universal Testing Machine. If equipped with accessories, can perform mechanical property test for high strength bolt, chain, steel wire and other materials.
2.The main machine adopts underneath hydraulic cylinder; the power to adjust test space and transmission devices are installed at the bottom of the main machine, running stably; upper and lower jaw base are open structure, easy to clamp specimen.
3.Independent hydraulic servo loading system, using high precision broadband electro-hydraulic servo valve to ensure system high precision, high efficiency, low noise, quick response; using independent hydraulic clamping system to ensure system run stably and low noise, and no-slipping of specimen during test.
4.Computer control, completely realizing three closed-loop control to test force, displacement, strain, test procedure control, data acquisition, processing, analysis (test data including: elastic modulusE, tensile strength Rm, upper yield point ReH, ReL etc.), accurate, reliable.
Ⅱ.Main specifications:
|
Spec. |
WAW-300B |
WAW-600B |
WAW-1000B |
|
Max. test force(kN) |
300 |
600 |
1000 |
|
Effective measuring range(kN) |
6-300 |
12-600 |
20-1000 |
|
Indicating value precision (better than indicating value) |
±1% |
±1% |
±1% |
|
Max.distance between tensile jaws(mm) |
600 |
650 |
650 |
|
Max. distance between upper and lower platens(mm) |
450 |
450 |
500 |
|
Size of upper and lower platen(mm) |
Φ160 |
Φ160 |
Φ160 |
|
Clamping range of round specimen(mm) |
Φ6-13;
Φ13-26 |
Φ13-26;
Φ26-40 |
Φ13-26;
Φ26-40 |
|
Clamping range of flat specimen(mm) |
0-15 |
0-15; 15-30 |
0-15; 15-30 |
|
Max. width of flat specimen(mm) |
70 |
70 |
70 |
|
Main machine dimension (mm) |
740*550*2000 |
740*550*2100 |
840*580*2200 |
|
Control dimension(mm) |
2000*500*1000 |
2000*500*1000 |
2000*500*1000 |
|
