Homepage >> Products >> WDW Electronic Universal Testing Machine >> WDW-100 Microcomputer Controlled Electronic Universal Testing Machine
WDW-100
Microcomputer Controlled Electronic Universal Testing Machine
1.Main function & application:
WDW-100 microcomputer controlled electronic universal testing machine is mainly applicable to test tension, compression, bending and other mechanical property indexes for metallic, nonmetallic, composite materials. Its precise auto control and data acquisition system realizes full digitalization adjustment to data acquisition and control procedure. For tensile test, it can test max. bearing tension, tensile strength, extension strain, elogation and other technical indexes, which all can be calculated after test through computer and display test curves and results. If it is connected with printer, it can print test reports.
1.It has remote control box through which can adjust crossbeam moving, operating flexibly, switching randomly.
2.After test, it can automatically return to the original position, intelligent, efficient, quick.
3.It has limit position protection function, overcurrent protection function, reliable, safe.
4.It has strong test database and can save, inquire and recall for test data.
5.It can realize constant speed control to speed, stress, deformation, strain, stroke, load, extension, displacement, low-cycle control and self-programming control.
6.It can realize switch among many test curves: stress-strain, load-deformation, load-displacement, load-time, deformation-time, displacement-time, load-strain. It has functions of test curve partial enlargement, superposition and comparasion.
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechical packaging, geotextile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
Application range: JG149-2003, JG158-2004, GB/T5386.2-2001, GB/T7689.5-2001, GB8813-1998, GB/T17671-1999, GB/T9641, JG/T24-2000, JC/T547-2005, GB/T16777-1997( users should provide the compression grips themselves), JG/T157-2004, GB/T8813-88 Test Method of Compression Property for Outer Wall Heat Insulating Material; JGJ144 Technical Criterion for Outer Wall Heat Insulating Engineering.
2.Basic configuration:
|
Name |
Item |
Qty. |
|
Main machine |
100KN portal frame; shell is sprayed with plastics
Precise ball screw assembly |
1 set
2 sets |
|
Controller |
Computer screen display |
1 set |
|
Drive system |
Taiwan Dongyuan AC servo motor and driver
German Bomet speed reducer
Synchronous belt drive |
1 set
1 set
1 set |
|
Remote box |
To control beam moving quickly, conveniently |
|
|
Sensor |
Hub and spoke |
1 pc. |
|
Photoelectric encoder |
|
1 pc |
|
Limit position device |
An integration of screen printing technique and photoelectric technique |
3 pcs |
|
Tensile accessories |
Round jaw: Φ4-9mm Flat jaw: 0-7mm
Other type: Φ9-14mm; Φ14-20mm; 7-14mm; 14-20mm; optional/additional charge |
2 sets/each |
|
Compression platens |
Φ100mm |
1 set |
|
Electronic extensometer |
YYU-10/50, gauge length:50mm; deformation: 10mm, optional/additional charge |
1pc |
|
Bending device |
Diam. of pressure head: Φ10mm; Span: 0-300mm, adjustable, optional/additional charge |
1 set |
|
Software |
Special software for electronic universal testing machine |
1 set |
|
