Homepage >> Products >> WDW-20 Microcomputer Controlled Electronic Universal Testing Machine
WDW-20
Microcomputer Controlled Electronic Universal Testing Machine
1.Main function & application:
WDW-20 microcomputer controlled electronic universal testing machine is mainly applicable to test tension, compression, bending and other mechanical property indexes for metallic, nonmetallic, composite materials. Its precise auto control and data acquisition system realizes full digitalization adjustment to data acquisition and control procedure. For tensile test, it can test max. bearing tension, tensile strength, extension strain, elogation and other technical indexes, which all can be calculated after test through main controller according to test parameters set before test and display test curves and results. After test, all parameters can be inquired and printed.
The manufacturing and verification standards: GB/T16491-2008 Electronic Universal Testing Machine; JJG139-1999 Metrological Verification Regulation for Tensile, Compression and Universal Testing Machine; and national standards as: ASTM, ISO and other industrial standards and also users can set test methods and calculation methods themselves.
1.It has remote control box through which can adjust crossbeam moving, operating flexibly, switching randomly.
2.After test, it can automatically return to the original position, intelligent, efficient, quick.
3.It has limit position protection function, overcurrent protection function, reliable, safe.
4.It has strong test database and can save, inquire and recall for test data.
5.It can realize constant speed control to speed, stress, deformation, strain, stroke, load, extension, displacement, low-cycle control and self-programming control.
6.It can realize switch among many test curves: stress-strain, load-deformation, load-displacement, load-time, deformation-time, displacement-time, load-strain. It has functions of test curve partial enlargement, superposition and comparasion.
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechical packaging, geotextile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
Application range: JG149-2003, JG158-2004, GB/T5386.2-2001, GB/T7689.5-2001, GB8813-1998, GB/T17671-1999, GB/T9641, JG/T24-2000, JC/T547-2005, GB/T16777-1997( users should provide the compression grips themselves), JG/T157-2004, GB/T8813-88 Test Method of Compression Property for Outer Wall Heat Insulating Material; JGJ144 Technical Criterion for Outer Wall Heat Insulating Engineering.
2.Technical specifications:
|
No. |
Test Item |
Technical Requirement |
|
1 |
Max. test force |
20KN |
|
2 |
Resolution of test force |
1/250000 |
|
3 |
Min. reading value of deformation |
0.01 |
|
4 |
Relative error of indicating value |
In measuring range 1%-100%; ±1% |
|
5 |
Repeatibility of load relative error of indicating value |
≤1% |
|
6 |
Relative error of zero point |
±0.1% |
|
7 |
Speed range |
0.05-500mm/min |
|
8 |
Test space (H*W) |
800*400mm |
|
9 |
Loading Mode |
Electrically loading |
|
10 |
Power supply (should be firmly grounded) |
220V±10%, 50Hz |
|
11 |
Dimension of main machine |
650*500*1650mm |
|
12 |
Weight |
200kg |
|
