|
|
 |
| |
2工位浮封跑合磨损泄漏性能试验机，用于2对浮封环组件静态密封性能试验、动态密封性能试验、可靠性试验、工作寿命试验。测试2对浮封环组件在运转跑合期的腐蚀与磨损程度，考核浮动油封在强化条件下使用可靠性程度。研究评定浮封耐久性能、可靠性程度和工作寿命。
→浮封旋转扭矩试验；浮封轴向加载力试验；实时扭矩测试、载荷测试、轴向力位移控制，绘制浮封温度-时间曲线，浮封扭矩-时间曲线，浮封轴力-扭矩曲线，试验力-位移曲线。
→浮封润滑油滴漏实时监控：试验过程发生润滑油滴漏，自动弹窗报警，自动停机并记录试验时长。
→浮封环温度实时监测：多点监测浮封环温度和润滑油温度，超温弹窗报警，自动停机并记录试验时长。
→工程机械的行走部件与行星减速部件上起端面动态密封功能的浮动油封跑合运转试验。
→浮动油封偏移加载试验机；浮封角度偏移加载试验；浮封偏轴偏移加载试验；浮封角度偏移加载和偏轴偏移加载组合试验；浮动油封跑合磨损偏轴偏移1.5mm，摆动角度偏移量0.5°～5°。
→浮动油封强化动态密封性能试验机；浮动油封实际使用工况4倍～5倍强化动态密封性能试验；浮动油封1500h强化动态密封性能试验；浮封1500h工作寿命强化试验；全封闭可拆卸浮封座沙箱，模拟油气水、粉尘、泥浆、盐碱液、石英砂、黏土砂粒等工况，保证转动试验过程中油气水、粉尘、黏土砂粒等不会泄漏。实时测量油温。
→浮封跑合磨损电子光学放大系统，观察浮封环跑和磨损情况，图像传至计算机显示放大，可拍照录像存储。
→急停开关及启动按钮可接入安全继电器，与电气及计算机软件联动控制。安士能安全门通过软件自动控制。
→2工位浮动油封跑合磨损泄漏性能试验机，用于过程流体动力学研究，流体机械密封结构力学研究，流体设备旋转接头密封材料研究，流体润滑理论研究。指导流体机械密封结构设计，石油化工流体搅拌机械装备研究设计，压力容器密封技术设计。
→浮动油封跑合磨损水平荷载推进系统，高速旋转驱动系统，红外温度监测系统，润滑油滴漏监控测量判断系统，HRJ-Test浮动油封跑合磨损泄漏性能软件系统。
→浮动油封跑合磨损扭矩荷载容量2x（100N.m～200N.m），浮动油封轴向荷载容量2x（3000N～5000N）。
→浮动油封跑合磨损动荷载频率0～20次/min。
→浮动油封跑合磨损正反向高速旋转速度30～300r/min，0～∞计数。
→浮动油封跑合磨损轴向水平载荷推进行程0～100mm，推进速率20～100mm/min。浮封跑合磨损温度测量0～300℃。
2 Station Floating Seal Running Wear Leakage Performance Tester；Floating Seal Leakage Performance Testing Machine；Floating Ring Seal Abrasion Tester；Running-in Characteristic Testing Machine；Test method of mechanical seal；DO type floating seals for winning machinery；Rubber seals of act on double seal；Valve stem reciprocating seals of engine and performance test method；Turbocharger seal rings Test method；Rotary shaft lip-type seals incorporating thermoplastic sealing elements；Floating Seal Ring Performance test procedures；Specification for carbon-graphite sealing ring for mechanical seals；Blanks for cemented carbide sealing ring；Compounds of reciprocating rubber seals；Seal element Fatigue Test System；Seal Element Friction Wear Tester；Mechanical Seal Element Running Wear Tester；Rubber Seal Friction Wear Tester；Double Seal Wear Tester；Running Attrition Tester；Floating Oil Seal Running in Wear Leakage Performance Tester；Running-in and Wear-out Performance Test for Floating Oil Seal；Floating Oil Seal Running-in and Wear-out Performance Tester；Sealing Ring High Low Temperature Compressive Torsion Fatigue Tester；Caterpillar Band Sealing Ring Fatigue Durability Life Tester；Wheel Hub Rotating Moment Vibration Acceleration Fatigue Tester；Corrugated Pipes Two-Dimensional High Temperature Fatigue Tester；Automobile Service Brake Fatigue Strength Bench Tester；Tunnel Boring Machine Disc Cutter Friction Wear Fatigue Life Testing；Railway Tunnel Anchor Channel Bolt Fatigue Tester；Tester for Frame Scaffolding With Steel Tubules；Door-type Steel Pipe Scaffolding Tester；No Vibration Servo Universal Materials Tester；No Vibration Rebar Mechanical Splicing Tensile Tester；Cable clamp Rotary Bending Endurance Tester；Coupling Torque Testing Platform System；Optical Fibre Cables Torsion Bending Fatigue Tester；Carbon Fiber High-speed Strain Tensile Tester；Metallic Bone Plates Bending Fatigue Properties Tester；Rubber seals for yaw and pitch bearings of wind turbine generator；Aircraft Wheel Runway Alternating Impact Load Durability Test System；Automobile Gearbox Torsion Testing Machine；Steering Drive Axle Gearbox Differential Assembly Test Stand；Ten Brake Cable Tensile Testing Machine；Ten Brake Cable Tensile Tester；Couplings Torque Calibration Pregrinding Test Platform；Wind Turbines Couplings Torque Test System；Coupling Diaphragm Tensile Bending Torsion 3D Dynamic Load Fatigue Test System；Railways Switch Machines Squeeze Out Force Tester；Disc Cutter Rings Wear Resistance Impact Fatigue Tester；Drill Pipe Friction Wear Tester；Seal Element Friction Wear Testing Machine；Seal Element High-speed High-Low Temperature Tensile Fatigue Testing Machine System；
上一篇：50kN铁路道岔转辙机挤脱力试验机Railways Switch Machines Squeeze Out Force Tester
下一篇：HRJ-6000kN液压加载叠加力标准Hydraulic Loading Build-up Force Standard Machine |
|
|
| |
