JG/T 503-2016连接盘内侧环焊缝抗剪强度试验：对Z型产品试验荷载P由0kN加至36kN后卸载，再由0kN加至120kN，持荷2min，连接盘立杆内侧环焊缝各部位不应破坏；对B型产品试验荷载P由0kN加至24kN后卸载，再由0kN加至80kN，持荷2min，连接盘立杆内侧环焊缝各部位不应破坏。
60.3mm钢管支架内侧环焊缝抗剪强度试验；jnshiyanji；51mm钢管支架内侧环焊缝抗剪强度试验；48.3mm钢管支架内侧环焊缝抗剪强度试验；PKJ承插型钢管支架构件强度试验机；200kN盘扣式钢管支架构件试验机；脚手架连接盘单侧抗剪强度试验、连接盘双侧抗剪强度试验、双侧弯剪强度试验、连接盘抗弯强度试验、连接盘抗拉强度试验、可调托撑和可调底座抗压强度试验；100kN钢管脚手架扣件试验机；120kN碗扣式钢管脚手架构件试验机；300kN门式钢管脚手架试验机；脚手架上碗扣强度试验、下碗扣焊接强度试验、横杆接头强度试验、横杆接头焊接强度试验、KDZ可调支座抗压强度试验；脚手架直角扣件抗滑性能试验、抗破坏性能试验、扭转刚度性能试验，旋转扣件抗滑性能试验、抗破坏性能试验，对接扣件抗拉性能试验，底座抗压性能试验；弯曲试验力-位移曲线；200kN重型钢管支架强度试验机；轻型钢管支架强度试验机；33.7mm钢管支架力学强度试验机；SUT-D1000kN无振动伺服万能材料试验机；38mm钢管支架强度试验机；42.4mm钢管支架力学试验机；EN 74；DIN 39；BS 1139；GB 15831；GB24911；JGJ231；JG/T503-2016；JGJ130-2011；GJ166-2016；GB/T3091-2015；JC/T2287-2014；DL/T1209.4-2014；JGJ128-2010；GB 24910；CB 4204-2012；SH/T3555-2014；
Connect Plate Weld Shear Strength Test；Connect Plate Double Shear Strength Test；Steel Tube Scaffold Couplers Tester；Bowl-coupler Type Steel Tube Scaffolding Member Tester；Disk Lock Steel Tubular Scaffold Components Tester；Tubular Steel Frame Scaffolding Tester；Door-type Steel Pipe Scaffolding Tester；Scaffolding Connect Plate Shear Strength Tester；Bend Test Force-Displacement Curve；hrjtest；Scaffolding couplers Tester；Metal Scaffolding Tester；jnshiyanji；Frame Scaffolding Tester；right angle coupler test；swivel coupler test；sleeve coupler test；base-plate test；U-jack test；coupler joint test；standing tube test；crown tube test；slanting support test；supports test；jack support test；Steel tube scaffold couplers；disk lock steel tubular scaffold in construction；steel tubular scaffold with couplers in construction；frame scaffoldings with Buckles Bowl in construction；Welded steel pipes for low pressure liquid delivery；germane version；hrjtest；Loose steel tubes；tube and coupler scaffolds-Technical delivery conditions；Couplers spigot pins and base plates；use in false work and scaffolds；hrjtest；Special couplers-Requirements and test procedures；quick-erectable mobile scaffolding；prefabricated elements；Specifications for substation ascending operation and protective device；composite quick-installed scaffold；safety of frame scaffoldings with steel tubules in construction；Technical specification for construction safety；steel scaffold building in petrochemical industry；tubes-Requirements and test procedures；Steel plate punched coupler；
济南恒瑞金试验机有限公司；脚手架支架构件力学性能试验机；力值硬度计量专业委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心）
上一篇：GB/T 50344-2019建筑结构检测技术标准主要内容
下一篇：5kN十字形试样双向拉伸试验机Cruciform Test Piece Biaxial Tensile Tester |
