试验机_济南恒瑞金试验机有限公司

20N.m金属骨螺钉自攻性能试验机，主轴连续旋转并作轴向运动提供可变轴向压力，记录螺钉试验力、扭矩和轴向位移；扭转力恒定速率30r/min，轴向压缩载荷以2N/s恒定速率递增，直至螺钉的自攻特性使得试验块在扭矩和轴向位移出现显著变化，此时，中断轴向力的增加并保持自攻开始时的最初载荷力。一次有效的螺钉自攻性能试验应从自攻开始后完整旋转5圈，最大轴向力为螺钉自攻力；HRJ-Test测控系统同时记录两个Y轴数据随时间X轴的变化，Y轴1为轴向力和扭矩，Y轴2为位移；轴向压力传感器2N-200N，精度0.5％；扭矩传感器分辨力0.001N.m；轴向压力扭矩复合传感器；线性位移传感器分辨力0.01mm；25mm刚性试验块夹具，多孔间距大于5倍螺钉直径；20N.m松质骨自攻性能试验机；20N.m皮质骨自攻性能试验机；20N.m接骨螺钉自攻性能测试仪；舌悬吊系统螺钉自攻性能试验；颅颌面接骨螺钉自攻性能试验；锁定骨板自攻性能试验；固定螺钉自攻性能试验；空心螺钉自攻性能试验；手足踝螺钉自攻性能试验；钛骨螺钉自攻性能试验；髋关节骨钉自攻性能试验；200N接骨螺钉轴向压力试验机；200N接骨螺钉轴向拔出力试验机；20N.m接骨螺钉旋动扭矩试验机；20N.m 接骨螺钉扭矩疲劳试验机；骨科可吸收材料试验机；磷酸钙骨水泥试验机；HA/HB/HC/HD1.5-8.0mm螺钉扭矩轴力测定；HRJ生物力学试验机；

YY/T1505-2016外科植入物金属接骨螺钉自攻性能试验方法；ASTM F543-2013；ASTM F1839；AETM E122；ASTM F2502；ASTM F116；ASTM F1264；ASTM F2193-07；ASTM F1582；ASTM F1798；ASTM F382；ASTM F1744；ASTM E467；ASTM E1942；DIN ISO 5832；HRJ Tests；ISO 7207-1:2014；ISO 14879-1；ISO 1099；ISO 4965；ISO 376；ISO 5837-1；ISO 14602；ISO 14630；ISO 9268；ISO 5833；ISO 5835；ISO 6475；ISO 7206-4；ISO 7206-6；ISO 7206-8；YY/T0019.11；YY/T1503-2016；YY/T1576-2017；YY/T1558.3-2017；YY 0018-2016；YY/T0509；YY 0346；YY 0605.12-2016；YY 0605.9-2015；YY/T0605.5；YY/T0605.6；YY/T0605.7；YY/T0605.8；YY/T0661-2017；YY/T1576-2017；HRJ Tests；YY/T0640-2016；YY 0341-2009；YY/T0727.1；YY/T0345；YY/T0809.4；YY/T0809.6；YY/T0809.8；GB/T19701.2-2016；GB/T12417.1-2008；GB/T3075；GB/T15248；GB/T16825.1；GB/T12417.2-2008；GB/T13810-2017；GB 4234.1-2017；YY/T1504-2016；YY/T1506-2016；

Metallic Bone Screws Self Tapping Performance Tester；Metallic Bone Screws Axial Pullout Strength Tester；Metallic Bone Screws Driving Torque Tester；Implant for surgery Performance Tester；Implant for surgery Mechanics Tester；Test method for determining the self-tapping performance of metallic bone screws；Test method for determining the axial pullout strength of metallic bone screws；Test method for driving torque of metallic bone screws；Spinal Implant Constructs Mechanics Tester；Spinal Implant Assembly Mechanics Tester；Spinal Implant Assembly Torsional Stiffness Tester；Two percent（2％）offset angular displacement Test；Endurance performance of stemmed femoral components；Spinal Arthrodesis Implant Yield Load Tester；Endurance performance of stemmed femoral components；Anterior cervical plate system test；Biomechanics Testing Machine；Medical Screwdriver Bits Torsion Tester；Miniature Biomechanics Tensile Strength；China Material Tester；Asia Material Tester；HRJ Various Testing Machines；Testing Machines Manufacturer；Laboratory Equipment；Mechanics Tester Manufacturer；World Material Tester；Tester Service Center；Tester Fittings Supply Center；Test Accessories Design Manufacture Center；Special Test Accessories Center；Testing Machine Accessories；Material Tester Attachment；Material Tester Fixture；