GB/T16957-2012复合钢板焊接接头力学性能试验方法，规定了复合钢板焊接接头的拉伸、弯曲、冲击和硬度试验方法。HRJ Tester；复合钢板焊接接头拉伸试样分为焊接接头拉伸试样和焊缝金属拉伸试样。焊接接头拉伸试样分为两种，一是去除覆材的纯基材试样，试样厚度a≤Tb；另一种是包括覆材的试样，试样厚度a＝Tb；
GB/T16957-2012标准适用于压力容器、核反应堆、储槽和舰船及其他用途的以钢材为基材,以不锈钢或有色金属为覆材,总厚度不小于8mm的轧制、爆炸、堆焊、铸造、爆炸轧制、堆焊轧制及铸造轧制的单面和双面复合钢板焊接接头力学和工艺性能试验。对于总厚度小8mm的复合钢板和其他金属复合板焊接接头力学性能试验亦可执行GB/T16957-2012标准。
试板尺寸、试验项目及试样的截取部位应按相关标准要求执行,如相关标准没有规定时,按GB/T16957-2012标准执行；HRJ Tester；选择何种试样应按照相关产品要求选择,一般以覆层是否计入设计强度来决定采取那一种；复合钢板焊接接头拉伸试样宽度b≥25mm改为试样宽度b为25mm；一般采用全基材厚度试样,当复合钢板基材厚度Tb≥30mm,可以按照GB/T16957-2012标准在厚度方向均匀分层取样,最终以这样的多片试样的组合结果代替一个全厚度试验结果；HRJ Tester；复合钢板焊接接头弯曲试验结束后,试样的外表面和侧面都应进行检验,需要时也可以检查结合面处开裂的程度。
600kN复合钢板焊接接头试验机；600kN复合钢板焊缝拉伸试验机；300kN纯基材焊接接头试验机；
1000kN焊接接头力学试验机；HRJ Tester；双面复合板正弯试验机；基材焊接接头背弯试验机；≥10mm复合板侧弯试验机；300J焊接接头冲击试验机；覆材位于弯曲受拉面的正弯试验；覆材位于弯曲受压面的背弯试验；覆材和基材均处于同一弯曲状态的侧弯试验；600kN焊缝及熔敷金属拉伸试验机；复合钢板工艺性能试验机；压力容器力学试验机；横向应力角焊缝接头拉伸试验；测定焊接接头抗拉强度和断裂位置；HRJ Tester；板材十字搭接接头拉伸试验；＞4mm不锈钢复合板拉伸试验。
ISO 6892-1；ISO 7438；ISO 148-1；ISO 9016；ISO 4136；ISO 5178；ISO 9015-1；ISO 6507-1；ISO 5173；ISO 23718；GB/T150.2-2011/XG1-2015；GB/T150.4-2011压力容器制造、检验和验收；GB/T2650焊接接头冲击试验方法；HRJ Tester；GB/T2651焊接接头拉伸试验方法；GB/T2652焊缝及熔敷金属拉伸试验方法；GB/T2653焊接接头弯曲试验方法；GB/T26957-2011金属材料焊缝破坏性试验；十字形接头和搭接接头拉伸试验方法；GB/T6396复合钢板力学及工艺性能试验方法；GB/T32468-2015铜铝复合板带；GB/T8165不锈钢复合钢板和钢带；GB/T8546-2017钛-不锈钢复合板；GB/T8547钛-钢复合板；GB/T13147铜及铜合金复合钢板焊接技术要求；HRJ Tester；GB/T13148不锈钢复合钢板焊接技术要求；GB/T13149钛及钛合金复合钢板焊接技术要求；GB/T13238铜钢复合钢板；NB/T47002压力容器用爆炸焊接复合板；
Clad Steel Plates Welded Joints Tensile Tester；Welded Joints Tensile Tester；Clad Steel Plates Mechanics Tester；HRJ Tester；Clad steel plates-Mechanical technical tests on welded joints；Clad Steel Plates Welded Joints Tensile Sample；Clad Steel Plates Welded Joints Test Sampling；Clad Steel Plates Face Bend Test；Welded Joints Root Bend Test；Clad Steel Plates Side Bend Test；Pressure vessels Materials Tester；pressure vessels Fabrication inspection testing acceptance；HRJ Tester；Metallic materials Charpy pendulum impact test method；Impact test methods on welded joints；Tensile test method on welded joints；Tensile test methods on weld and deposited metal；Bend test methods on welded joints；Destructive tests on welds in metallic materials；Tensile test on cruciform and lapped joints；Clad steel plates Mechanical and technological test；HRJ Tester；Copper clad aluminum plate, sheets and strips；Stainless steel clad plates sheets and strips；Titanium clad stainless steel plate；Titanium clad steel plate；Specification for welding of copper and copper alloy clad steel plates；Specification for welding of stainless steel clad plate；specification for welding of titanium and titanium alloy clad steel plates；Cupper-steel clad plates；Explosion welded clad plate for pressure vessels；HRJ Tester；Material Testing Machine；Various Testing Machines；Laboratory Equipment；China Material Tester；Asia Material Tester；World Material Tester；International Type Material Tester；Testing Machines Manufacturer；Mechanics Tester Manufacturer；Tester Service Center；Tester Fittings Supply Center；Test Accessories Design Manufacture Center；Special Test Accessories Center；Testing Machine Accessories；Material Tester Attachment；Material Tester Fixture；Jinan HengRuiJin Testing Machine Co.,Ltd.
济南恒瑞金试验机有限公司；材料力学试验机制造商；山东省力值硬度计量委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心）
上一篇：GB/T25774.2-2016焊接材料接头强度测定Welding Materials Joints Tensile Tester
下一篇：5kN结构胶试验机GBT37126-2018 Structural Sealant Glazing Systems Tester |
