±10kN金属接骨板弯曲疲劳试验机用于骨接合植入物金属接骨板耐久性测试。完成接骨板动态循环弯曲试验、静态弯曲性能试验。动态频率0.01Hz～100Hz，动态载荷±10000N，动态数据采集频率6kHz。±10kN金属接骨板弯曲试验机可完成工程材料和组件的动态低周疲劳试验、高周疲劳试验。
 金属接骨板弯曲疲劳性能试验；外科植入物接骨板弯曲强度和刚度试验；金属接骨螺钉扭矩性能试验；内固定板和螺钉力学性能试验；金属接骨螺钉机械性能试验；220N300N骨科生物力学；300kN骨科植入物试验机；钛合金骨板试验；直型接骨板疲劳试验；角度接骨板疲劳试验；抓握式接骨板疲劳试验；管形接骨板疲劳试验；L型接骨板疲劳试验；钩接骨板疲劳试验；双弯接骨板疲劳试验；Y型接骨板疲劳试验；高尔夫球棒形骨板疲劳试验；T形骨板疲劳试验；重建接骨板疲劳试验；弧形重建接骨板疲劳试验；波形钢板疲劳试验；点状接触接骨板疲劳试验；接触动力加压接骨板疲劳试验；内装置接骨板疲劳试验机；接骨板棒材疲劳试验机；接骨板板材疲劳试验机；金属矫形棒疲劳试验机；锁定加压接骨板疲劳试验机；截骨锁定钢板疲劳试验机；股骨有限接骨板疲劳试验机；股骨近端接骨板疲劳试验机；股骨踝接骨板疲劳试验机；上肢钢板疲劳试验；下肢钢板疲劳试验；股骨颈接骨板疲劳试验；外侧接骨板疲劳试验；限制性接触接骨板疲劳试验；股骨髁支持骨板疲劳试验；三叶骨板疲劳试验；手足部骨板疲劳试验；弯曲强度和刚度试验；等效弯曲刚度试验；±10kN骨接合植入物疲劳试验机；±10kN骨板疲劳试验机；±10kN骨钉疲劳试验机；±10kN骨针疲劳试验机；±10kN骨棒疲劳试验机；±10kN聚髌器疲劳试验机；±10kN外科植入物疲劳试验系统；±10kN金属接骨板弯曲疲劳试验机；±10kN医疗器械疲劳试验系统；YY/T1503-2016；YY/T0342；YY0341；YY0017；YY0018；YY/T0509；YY/T0662；ISO 13356；ISO 9585；NF S94-063；ASTM F382-2014；DIN ISO 5832；ASTM E8M-04；ISO 6475；ISO 5835；ISO 9268；ASTM F543；ASTM F116；ASTM F2502；YY/T0727.1；GB/T13810-2017；GB23102；YY/T1504-2016；YY/T1505-2016；YY/T1506-2016；YY/T1576-2017；GB/T19701.1-2016；GB/T19701.2-2016；YY/T1558.3-2017；GB 4234.1-2017；YY/T0345.1；YY/T0661-2017；
Implants for surgery-Test method for determining the axial pullout strength of metallic bone screws；Test method for determining the self-tapping performance of metallic bone screws；Test method for driving torque of metallic bone screws；Tissue engineering medical device products-Standard practice for implantation assessment of absorbable resorbable biomaterials；Ultra-high-molecular-weight polyethylene-Part 1:Powder form；Part 2:Moulded forms；Calcium phosphates-Part 3:Hydroxyapatite and beta-tricalcium phosphate bone substitutes；Metallic materials-Part 1:Wrought stainless steel；Skeletal pins and wires-Part1:Material and mechanical requirements；Standard specification for semi-Crystalline poly(lactide) polymer and copolymer resin for surgical implants；Implants for surgery Cyclic Fatigue Testing System；Metallic Bone Plates Fatigue Testing Machine；Orthopaedics Testing Machine；Metallic Bone Plates Testing Machine；Bone screw Torsion Testing Machine；Orthopaedic biomechanics；Dentistry Testing Machine；Implants for surgery-Test method for determining the bending fatigue properties of metallic bone plate；Implants for osteosynthesis-Metallic Bone Plates；Implants for osteoporosis-Metal bone screws；Wrought cobalt-chromium-molybdenum alloy；Wrought titanium and titanium alloy for surgical implants；Wrought titanium-6aluminium-7niobium alloy；Standard Specification and Test Method for Metallic Bone Plates；Wrought high nitrogen stainless steel；Unalloyed titanium；Wrought titanium6-aluminium4-vanadium alloy；Cobalt-chromium-molybdenum casting alloy；bending strength test；equivalent bending stiffness test；deflection test；tensile strength test；yield strength test；upper yield strength test；lower yield strength test；；proof strength non-proportional extension test；percentage elongation after fracture test；percentage reduction of area test；stress test；Testing Machines Manufacturer；Mechanics Tester Manufacturer；Testing Machine Service Center；Testing Machine Fittings Supply Center；Design and Manufacture Center for Special Test Accessories；China Material Tester；Asia Material Tester；International Type Material Tester。
济南恒瑞金试验机有限公司 山东省计量测试学会力值硬度计量专业委员会委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心）
Jinan HengRuiJin Testing Machine Co., Ltd. Shandong P.R.C；
上一篇：混凝土枕等144类生产资料2018年质量督查Concrete Sleeper Static Loading Tester
下一篇：2018年建筑装饰装修材料质量抽查HRJ Asia Tester |
