试验机_济南恒瑞金试验机有限公司

500kN炭石墨制品抗压强度试验机；5kN炭石墨制品抗弯强度试验机；GB/T13465.1-2014不透性石墨材料力学性能试验方法总则；GB/T13465.2-2014不透性石墨材料抗弯强度试验方法；GB/T13465.3-2014不透性石墨材料抗压强度试验方法；HRJ Tester；GB/T13465.4-2014不透性石墨材料冲击强度试验方法；GB/T13465.8-2009不透性石墨粘接剂粘接剪切强度试验方法；GB/T13465.9-2009不透性石墨粘接剂粘接抗拉强度试验方法；HRJ Tester；GB/T21921-2008不透性石墨材料抗拉强度试验方法；GB/T3074.2-2008石墨电极弹性模量测定方法；GB/T33920-2017柔性石墨板试验方法；JB/T8133.1-2013电炭制品物理化学性能试验方法试样加工技术规定；JB/T8133.6-2013电刷软接线的脱出拉力；JB/T8133.7-2013电炭制品抗折强度；JB/T8133.8-2013电炭制品抗压强度；HRJ Tester；JB/T8133.9-2013电炭制品抗拉强度；JB/T8133.10-2013电炭制品径向抗压强度；JB/T8133.13-2013炭柱机械强度；JB/T9141.2-2013柔性石墨板材抗拉强度测试方法；JB/T9141.3-2013柔性石墨板材压缩强度测试方法；JB/T9141.4-2013柔性石墨板材压缩率回弹率测试方法；JB/T9141.8-2016柔性石墨板材滑动摩擦系数测试方法；JB/T9141.9-2014柔性石墨板材取样方法；JB/T7758.7-2008柔性石墨板应力松弛试验方法；YB/T5288-1999石墨阳极耐腐蚀试验方法；HRJ Tester；JB/T6370-2011柔性石墨填料环物理机械性能测试方法；JB/T6617-2016柔性石墨填料环技术条件；JB/T6620-2008柔性石墨编织填料试验方法；GB/T29035-2012柔性石墨填料环试验方法；SN/T1266-2003出口集装袋装鳞片石墨取制样方法；JB/T8133.3-2013；JB/T8133.4-2013；NB/T20366-2015核电厂核级石墨密封垫片试验方法；HRJ Tester；NB/T20367-2015核电厂核级石墨密封垫片鉴定规程；JB/T7609炭石墨材料抗冲击强度试验方法；JB/T8872-2016机械密封用炭石墨密封环技术条件；GB/T13465.5不透性石墨酚醛粘接剂收缩率试验方法；GB/T40408-2021；DL/T2095-2020；GB/T21432-2021；GB/T24533-2019；GB/T30544.13-2018石墨烯及相关二维材料；GB/T3518-2008E；HRJ Tester；GB/T3519-2008E；GB/T38887-2020；HG/T5573-2019；HRJ Tester；HG/T5608～5609-2019；HG/T5810-2020；HG/T5824-2021；JB/T13846-2020；JB/T2750-2020；JC/T2441-2018建筑绝热用石墨改性模塑聚苯乙烯泡沫塑料板；JC/T2508-2019；JC/T2627-2021建筑绝热用石墨改性挤塑聚苯乙烯泡沫板GXPS；JC/T519-2020；NB/T20364-2015；NB/T20365-2015；SH/T3430-2018；YB/T4037-2017；YB/T4821-2020；GB/T1431-2019炭素材料耐压强度测定；GB/T3074.1-2021炭素材料抗折强度测定；GB/T8721-2019炭素材料抗拉强度测定；GB/T1427-2016炭素材料取样方法；铝电解用炭素材料力学强度试验机；预焙阳极阴极炭块抗折强度试验机；固体石墨材料抗折强度试验机；GB/T26295-2010预焙阳极和阴极炭块四点法测定抗折强度；ISO 12986.2；GB/T26297.1-2010铝用炭素材料取样方法底部炭块；GB/T26297.2-2010铝用炭素材料取样方法侧部炭块；ISO 8007-3；GB/T26297.3-2010铝用炭素材料预焙阳极；GB/T26297.4-2010铝用炭素材料阴极糊；GB/T26297.5-2010铝用炭素材料取样方法煤沥青；GB/T26297.6-2010铝用炭素材料取样方法煅后石油焦；GB/T38338-2019炭素材料断裂韧性测定方法；HRJ Tester；GB/T39535-2020炭素材料肖氏硬度测定方法； GB/T40398.1-2021炭-炭复合炭素材料摩擦磨损性能试验；GB/T40398.2-2021炭-炭复合炭素材料弯曲性能试验；HRJ Tester；GB/T40406-2021炭素材料压缩静态弹性模量和泊松比测定方法；YS/T63.13-2016铝用炭素材料检测弹性模量的测定；YS/T63.15-2012铝用炭素材料检测耐压强度的测定；YS/T63.27-2015铝用炭素材料检测预焙阳极断裂能量的测定；ISO 11706；石墨炭素材料抗拉强度试验机；石墨管抗压抗折强度试验机；炭砖抗压强度试验机；500kN炭石墨制品抗压荷载试验机；5kN炭石墨制品抗折荷载试验机；炭石墨制品拉伸应力应变试验机；四点负荷法测定炭素材料抗折强度；石墨电极芯挠曲断裂模数试验机；ASTM C1106；ASTM C904；ASTM E4-2016；ASTM E74-2013a；ASTM C565-2015；ASTM C749-2015；ASTM C651-2015；ASTM C1025-2015；ASTM D7779-2015；ASTM D4018-2011；ASTM C709；ASTM D7846-2016；ASTM C662-2016；CNS 2780；全自动铁矿球团压力试验机；煤和岩石力学性能试验机；300kN橡胶弹性垫板静刚度试验机；振动冲击隔离器静刚度试验机；电子抗压抗折强度试验机；碳化硅制品抗折强度试验机；水泥抗硫酸盐侵蚀抗折强度试验机；复合保温外模板抗折荷载试验机；300kN混凝土抗弯拉强度试验机；全自动砂浆抗压强度试验机；微机全自动水泥抗压抗折试验机；10kN纸管压力强度试验机；5kN纸护角抗压弯曲强度试验机；包装箱压力和堆码试验机；通信光缆光纤接头盒连接器扭转弯曲疲劳试验机；三维协调加载高速试验机系统；高速高低温拉伸试验机系统；热熔对接接头高速拉伸冲击试验机；铝及铝合金板带材高速拉伸试验机；碳纤维材料应变控制高速拉伸试验机；慢应变速率慢拉伸应力腐蚀试验机；十字形试样双向拉伸试验机；双轴力对向压缩材料力学试验机；高强螺栓卧式拉伸试验机系统；5kN波纹管纵向载荷试验机；复合绝缘子芯棒应力腐蚀试验机；边坡柔性网网面抗拉强度抗顶破力试验机；HRJ Tester；钢绞线钢筋卧式拉伸试验机；无振动下拉上压伺服液压万能材料试验机；无振动钢筋机械连接拉伸试验机；钢筋套筒灌浆连接件反复拉压试验机；大跨度人造板弯曲抗折强度试验机；结构木材集成材力学特性试验机；防火门启闭可靠性试验机；石膏板断裂荷载硬度试验机；三缸全自动钢筋弯曲试验机；603金属材料管塑性变形弯管试验机；钢板钢带180°弯曲试验机；板带材弯曲强度试验机；微机控制钢轨静弯曲试验机；铁路隧道盾构衬砌预制混凝土管片抗弯曲试验机；玻璃弯曲强度试验机；汽车防撞钢梁板弯曲强度试验机；HRJ Tester；电子伺服接骨板动态弯曲疲劳试验机；带柄股骨部件疲劳性能试验机；椎间融合器生物力学性能试验机；2工位浮封跑合磨损泄漏性能试验机；密封圈模拟实际工况高低温压扭耐久试验机；工程机械车辆刹车制动压力扭矩试验机；金属波纹管垂向横向二维高温压力疲劳试验机；掘进机盘形滚刀摩擦磨损疲劳寿命试验测试系统；支重轮磨合跑合疲劳耐久寿命试验机；门式盘扣碗扣钢管脚手架扣件构件试验机；HRJ Tester；电液伺服混凝土轨枕静载试验机；超高性能混凝土抗拉强度试验机；全级配混凝土小梁弯曲试验机；陶瓷管材料弯曲强度抗折试验机；

Carbon and Graphite Strength Tester；Tester for Compressive Strength of Carbon and Graphite；Tester for Flexural Strength of Carbon and Graphite；Standard Test Method for Compressive Strength of Carbon and Graphite；Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature；Standard Practices for Force Verification of Testing Machines；Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines；Carbon materials Determination of the compressive strength；determination of the flexure strength of graphite electrodes；determination of the elastic modulus of graphite electrodes；determination of tensile strength of carbonaceous materials；Sample method of carbon material；Carbon Brick Compression Flexure Testing Machine；Graphite Products Compressive Flexural Strength Tester；Carbon Materials Tensile Compressive Flexural Strength Tester；The test method for compressive strength of carbon materials；The test method for tensile strength of carbon materials；Carbonaceous materials used in the production of aluminium；Prebaked anodes and cathode blocks flexural strength tester；four-point flexural strength test method；Sampling of carbonaceous materials used for aluminium production；Cathode blocks Flexural Strength Tester；Sidewall blocks Flexural Strength Tester；Resisted impact strength experiment method of carbon-graphite materials；Standard Terminology Relating to Chemical；Specification for carbon-graphite sealing ring for mechanical seals；Resistant Nonmetallic Materials Mechanical Properties Tester；Test at a uniform rate 3000psi(20.7MPa)/min；determination of the flexure strength of graphite electrodes；determination of the elastic modulus of graphite electrodes；carbonaceous materials tensile strength tester；Fully Automatic Iron Ore Pellets Compression Tester；Coal and Rock Mechanical Properties Tester；Rubber Elastic Pads Static Stiffness Tester；Vibration Shock Isolators Static Stiffness Tester；Silicon Carbide Products Bending Strength Tester；Cement Flexure Strength Tester；Composite Thermal Insulation Outside Template Bending Load Tester；Concrete Flexural Tensile Strength Tester；Mortar Compressive Strength Tester；Cement Compressive Flexural Strength Tester；Paper Tube Compression Testing Machine；Paper Edge Corner Flexure Testing Machine；Transport Packages Compression Stacking Testing Machine；Packing Box Compression Stacking Tester；HRJ Tester；Three-Dimensional Coordinated Loading High Speed Tester System；High-speed High-Low temperature Tensile Tester；Butt Fusion Joints High-speed Tensile-Impact Tester；Aluminium alloy sheets and strips High-speed Tensile Tester；Carbon Fiber High-speed Strain Tensile Tester；Slow Strain Rate Tension Stress Corrosion Testing Machine；Cruciform Test Piece Biaxial Tensile Tester；Double Axial Force Material Mechanical Tester；High Strength Bolt Horizontal Tensile Tester System；Corrugated Pipe Axial Load Tester；Composite Insulator Core Stress Corrosion Tester；Steel Strand Steel Bars Horizontal Tensile Tester；No Vibration Servo Universal Materials Tester；No Vibration Rebar Mechanical Splicing Tensile Tester；Repeated Tensile Compressive Tester for Grout Sleeve Splicing of Rebars；HRJ Tester；Wood-based Panels Large Span Flexural Strength Tester；Structural Timber Characterization Tester；Fire-proof Door Shutter Testing Machine；Gypsum Board Breaking Load Hardness Testing Machine；HRJ Tester；Three-Position Steel Bar Bend Tester；Metal Materials Bending Tester；Metal Materials Tube Plastic Deformation Bend Tester；Steel Sheet and Strip Bending Strength Tester；Steel Rails Bending Testing Machine；Reinforced Concrete Segment Bending Tester；Glass Bending Strength Testing Machine；Crash beam Bending Strength Testing Machine；Electronic Servo Dynamic Metallic Bone Plates Fatigue Tester；Stemmed Femoral Components Endurance Properties Tester；Intervertebral Body Fusion Device Biomechanics Tester；2 Station Floating Seal Running Wear Leakage Performance Tester；Sealing Ring High Low Temperature Compressive Torsion Fatigue Tester；HRJ Tester；Construction Machinery Vehicles Brake Moment Tester；Corrugated Pipes Two-Dimensional High Temperature Fatigue Tester；Tunnel Boring Machine Disc Cutter Friction Wear Fatigue Life Testing System；Track Rollers Running Wear Fatigue Durability Life Tester；Tester for Frame Scaffolding With Steel Tubules；Concrete Sleeper Static Loading Testing Machine；Ultra-high Performance Concrete Tensile Strength Tester；Fully-graded Concrete Flexural Strength Tester；Ceramic Pipes Flexural Strength Tester；