首页 >> 产品展示 >> 10N.m不锈钢餐具刀叉拉扭试验机
10N.m不锈钢餐具拉扭试验机
Stainless Steel Cutlery Tensile Torsion Tester
重要试验：
→叉、匙、汤勺和钝刀等不锈钢餐具的强度试验。
→把不锈钢餐具试件平放在水平的平面上，手柄颈部的最高点朝上，按长度每一厘米施加7N的力或不计长度施加100N，受力时间保持10s,并测量试件受力点处所允许的永久变形。
→不锈钢餐具手柄连接的牢固性试验：金属手柄、陶瓷以外的非金属手柄。
→不锈钢餐具拉力和扭转试验，在10N.m拉扭试验机上进行，拉扭试验要在同一试件上依次进行。
→不锈钢餐具拉力试验：须保持10s，拉力载荷位180N或90N。
→不锈钢餐具扭转试验：手柄表面积小于37cm²，转矩3.7N.m,保持时间10s；手柄表面积大于或等于37cm²，转矩4.5N.m,扭矩保持10s。
重要参数：
→不锈钢餐具扭矩：10N.m。
→不锈钢餐具拉力：90N；180N。
→不锈钢餐具定扭矩试验：3.7N.m；4.5N.m。
引用标准、文献文件：
→GB 4806.9-2016食品接触用金属材料及制品；GB/T15067.2-2016不锈钢餐具；GB/T15067.1不锈钢餐具术语；GB/T30769-2014不锈钢水果刀；EN ISO 8442-1；EN ISO 8442-5；BS EN ISO 4481；
→KFTT-10N.m刀叉拉扭试验机；0.5N.m～200N.m螺钉拉扭试验机；10N.m～2000N.m材料拉扭试验机；3kN.m～50kN.m螺栓拉扭试验机；HRJ Tester；食品安全国家标准；食品接触用金属材料及制品迁移试验；食品制备用刀具技术要求；刀具和餐具锋利度及耐用度测试方法；
Knife Fork Tensile Torsion Testing Machine；Screws Torque Tester；Preloading Structural Bolting Assemblies Test System；High Strength Bolt Automatic Testing System；Bone Screw Torsion Testing Machine；Desktop Bone Screw Torsion Tester；Electronic Servo Material Torsion Tester；Stainless Steel Cutlery Tensile Torsion Tester；Tension Torsion Testing Machine；
Materials and articles in contact with foodstuffs；Cutlery and table holloware；Requirements for cutlery for the preparation of food；HRJ Tester；Specification for sharpness and edge retention test of cutlery；Defines material and performance criteria, as well as test procedures for metal cutlery and related instruments used for food preparation；Two grades are defined-A normal grade with corrosion resistant prongs or blades able to be used in dishwashers and a special grade with corrosion resistant blades able to be used in dishwashers and sterilization processes；Stainless steel cutlery-Nomenclature；Stainless steel fruit knife；HRJ Material Testing Machine；HRJ Various Testing Machines；HRJ Laboratory Equipment；Testing Machines Manufacturer；Mechanics Tester Manufacturer；Tester Service Center；Tester Fittings Supply Center；Test Accessories Design Manufacture Center；Special Test Accessories Center；Testing Machine Accessories；Material Tester Attachment；Material Tester Fixture；
上一篇：1000kN高强螺栓拉力试验机
下一篇：恒瑞金试验机2016部分产品型号规格升级改动 |
