首頁 >> 産品展示 >> 300kN單板層積材結構木材力學性能試驗機Laminated Veneer lumber Structural Timber Mechanical Properties Tester
300kN單板層積材結構木材力學性能試驗機
Laminated Veneer lumber Structural Timber Mechanical Properties Tester
功能參數：
→300kN單板層積材結構木材力學性能試驗機，用于LVL層積拉伸彎曲力學性能試驗、LVL層積材抗彎強度和彈性模量試驗、規格材拉伸彎曲力學性能試驗、PSL平行積成木拉伸彎曲力學性能試驗、膠合層積木拉伸彎曲力學性能試驗、木結構部件拉伸彎曲力學性能試驗、框架部件拉伸彎曲力學性能試驗。
→300kN單板層積材結構木材力學性能試驗機，用于結構集成材抗拉試驗、承重集成材抗拉強度試驗、層積膠合集成材抗拉強度試驗、指接集成材抗拉強度試驗、斜接集成材抗拉強度試驗、拼寬集成材抗拉強度試驗；
→300kN單板層積材結構木材力學性能試驗機，測試木材含水率順紋抗拉強度、橫紋抗拉強度、順紋抗壓強度和彈性模量、木材順紋抗剪強度、接縫抗剪強度、木材彎曲強度和彈性模量。
→300kN單板層積材結構木材力學性能試驗機，測試木材垂直抗壓承載力、木材抗拉承載力、木材橫向承載力、木材原材扭轉剛度。測定木結構部件壓縮性能、扭轉特性、抗剪性能。
→膠合板刨花板、纖維板裝飾板、人造板木工板、地板結構板，指結層板、結構用膠合木、分等層板、木嵌塊木家具等物理力學性能測試及研究。
→木材人造板靜曲強度和彈性模量測定(三點/四點彎曲抗折)；木材人造板抗彎載荷測定。
→人造板內膠合(結合)強度測定；人造板表面膠合強度測定；人造板膠層剪切強度測定；人造板浸漬剝離性能測定；人造板沸煮剝離性能測定；人造板減壓加壓剝離性能測定；人造板耐剝離力測定；人造板握螺釘力測定。
→單板層積材結構木材力學性能試驗荷載10kN/20kN/30kN/50kN/100kN/200kN/300kN。
→單板層積材結構木材拉伸強度試驗間距＞900mm。
→單板層積材結構木材抗壓強度試驗間距＞900mm。
→單板層積材結構木材彎曲強度試驗間距＞8000mm。
→單板層積材結構木材試件尺寸90x45mm～300x63mm。
→單板層積材結構木材抗彎強度試件≤8000mm。
→HRJ高剛性高穩定性、無振動沖擊流線型門式荷載機架。
→HRJ-Test單板層積材結構木材集成材拉壓特性試驗機測試軟件/中英文。
引用標准、文獻文件：
→300kN單板層積材力學性能試驗機；LVL結構木材力學性能試驗機；結構LVL工程木力學試驗機；LVL層積材抗彎強度試驗機；膠合層積板材彈性模量試驗機；木結構規格材彈性模量試驗機；APA PS 1-09厚度方向抗剪強度試驗夾具；AS/NZS 4357.2結構單板層積材（LVL）結構性能試驗方法測定；AS/NZS 4063.1:2010結構木材的特性試驗方法；AS/NZS 4266.0人造木基板材測試方法標准；AS/NZS 4266.1；AS/NZS 4266.2；AS/NZS 4266.3；AS/NZS 4266.5彎曲強度和彎曲模量；AS/NZS 4266.6內結合強度；AS/NZS 4266.7表面結合強度；AS/NZS 4266.8吸水厚度膨脹；AS/NZS 4266.9膠粘質量；AS/NZS 4266.10濕彎強度；AS/NZS 4266.11循環後內結合強度和彎曲強度；AS/NZS 4266.13握螺釘力；AS/NZS 4266.14尺寸穩定性；AS/NZS 4266.20耐磨性；AS/NZS 4266.24耐開裂性；AS/NZS 4266.27沖擊性能；AS/NZS 4266.28粘合強度；AS/NZS 4266.32；AS/NZS 4266.33；AS/NZS 4266.34；AS/NZS 2269.0；AS/NZS 2098.4；AS/NZS 1604.1；AS/NZS 2098.11；AS/NZS 2098.2 B；AS/NZS 2098.3彎曲強度；AS/NZS 2098.2；AS/NZS 2269.1 7.1；AS/NZS 2269.1 7.2；AS/NZS 2269.1 7.1 B；AS/NZS 2269.1 7.2彈性和剛性模量；AS/NZS 4357.3；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294：APA EWS S550-2005；GSO ISO 10033-2-2015；ISO 10033-1-2011；ISO 12578-2016；ISO 12579；ISO 12580；ISO 18375-2017；ANSI/AITC A 190.1；ASTM D3737-2012；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012； 2011；ASTM D5055-2013；ASTM D3528；NF B51-127-19；ASTM D5456-2017；EN 1912：2012；EN 1193；EN 1194；EN 338-2016；EN 14081-1-2011；EN 384-2016；EN 12369-2-2011；EN 12369-3；EN 520；EN 16737-2016；EN 14566；EN 15283-2；EN 14272-2011；ASNZS 1328.1；AS/NZS 1328.2；AS/NZS 1604.5；AS/NZS 2269.0-2015；ASTM D1038-2011；ASTM D3498-2011；ASTM D3499-2011；ASTM D5516-2017；ASTM D6305-2015；ASTM D7341；ASTM D4688；AS/NZS 1577-2018；ISO DIS 16892-2；EN 310；EN 312-2010；EN 314-1；EN 314-2；EN 319；EN 300；EN 14080；LY/T1927-2010；GB/T36408-2018；LY/T2917-2017；DB44/T1436-2014；GB/T20240-2017；GB/T26899-2011；GB/T36872-2018；GB/T38070-2019；JG/T464-2014；LY/T1787-2016；輕型木結構連接件通用技術條件輕型木桁架技術規範；LY/T1815-2009；LY/T2549-2015；LY/T2711-2016；GB 17657-2013；應力分級木材；GB/T50329-2012；GB/T1928-2009；GB/T1936.1-2009；GB/T1936.2-2009； GB/T1937-2009；GB/T1938-2009；GB/T1939-2009；GB/T1941-2009；GB/T1942-2009；hrjtest；GB/T1943-2009；GB/T11718-2009；GB/T20241-2006；GB/T20239-2015；GB/T5849-2016；LY/T2388-2014；GB/T18102-2020；hrjtest；結構膠合層壓板強度等級測定；GB/T21128-2007；GB/T21129-2007；GB/T21723-2008；GB/T22349-2008；GB/T22350-2017；GB/T23471-2018；裝配式木結構建築技術荷載規範；GB/T23472-2009；HG/T2727-2010；GB 50005-2017；GB 50009-2012；GB 50206-2012；GB/T17659.1-2018；GB/T17659.2-2018；GB/T29893-2013；GB/T29897-2013；GB/T50708-2012；地板系統木框膠粘劑強度試驗機；GB/T50772-2012；GB/T51233-2016；GB/T51226-2017；LY/T2228-2013；JGJ/T265-2012；GB 50016-2014；GB/T50165-2020；GB 50828-2012；LY/T3141-2019；hrjtest；LY/T3142-2019；建築工程方木原木結構設計；GB/T22102-2008；GB/T28985-2012；受彎木結構力學性能檢驗方法；GB/T35216-2017；輕型木結構鋸材用原木檢驗；GB/T36407-2018；GB/T37315-2019；JG/T489-2015；JG/T434-2014；JG/T572-2019；LY/T1580-2010；LY/T2059-2012；LY/T2381-2014；LY/T2389-2014；LY/T2916-2017；LY/T3217-2020；木結構工程施工質量驗收規範；LY/T3219-2020；LY/T3228-2020；GB/T50361-2018；hrjtest；GB/T38704-2020；結構用木材強度等級檢驗測試；GB/T28986-2012；GB/T28987-2012；GB/T28990-2012；GB/T28993-2012；膠合木結構技術規範；木結構試驗方法；GB/T29895-2013；GB/T31264-2014；GB/T34719-2017；GB/T34725-2017；GB/T34744-2017；多高層木結構建築技術標准；GB/T35215-2017；GB/T36785-2018；hrjtest；GB/T37745-2019；建築工程承重膠合木結構設計；GB/T38359-2019；GB/T39422-2020；LY/T2377-2014；原木鋸材批量檢查抽樣判定方法；LY/T2380-2014；LY/T2383-2014；LY/T2720-2016；LY/T2721-2016；輕型木結構用指接規格材；LY/T2722-2016；LY/T2918-2017；LY/T3140-2019；LY/T3143-2019；LY/T3144-2019；規格材目測分級規則；LY/T3145-2019；LY/T3146-2019；LY/T 3218-2020；T/CWPIA 1-2018；T/CECS 10030-2019；BB/T0040-2007；規格材材質等級檢驗方法；結構用集成材理化力學性能試驗機；建築工程輕型木結構設計； hrjtest；帶矩形橫截面的強度分級結構木材結構木材機械性能測定；木基緊密板材機械力學性能試驗機；熱帶硬木強度分級；石膏板系統用機械緊固件試驗方法；石膏纖維板力學性能試驗機；膠合板結構規格力學試驗機；膠合板韌性試驗機；高溫下經耐火處理的軟木膠合板彎曲性試驗方法；膠合板屋面板彎曲強度試驗機；木材物理力學試驗方法；木材抗彎強度彈性模量測定；木材順紋抗剪抗拉強度試驗；木材硬度抗劈力試驗；木材橫紋抗壓彈性模量測定；木質地板膠合板力學試驗機；結構用人造板刨花板物理力學試驗機；結構用木質複合材産品力學性能試驗機；結構用鋸材力學性能試驗機；結構用人造板材料力學荷載強度性能試驗機；結構用木質覆面板保溫牆體試驗方法；木結構剪力牆靜載和低周反複水平加載試驗方法；指接材用結構膠黏劑膠合性能測試方法；木結構銷類緊固件屈服彎矩試驗機；結構用木材金屬緊固件連接試驗；結構材縱接性能的測試方法；300kN結構木材集成材力學特性試驗機；300kN規格材拉壓彎剪強度性能試驗機；600kN木結構原木板材力學性能試驗機；大跨度木材人造板抗彎強度試驗機；1000kN木結構荷載強度試驗機；50kN微機控制人造板材試驗機；hrjtest；10kN膠合纖維人造板力學試驗機；20kN木工板木質地板結構板力學試驗機；100kN集裝箱木板材力學試驗機；200kN腳手架木模板力學強度試驗機；拼裝式膠合板箱力學試驗機；
LVL Structural Timber Mechanical Properties Tester；Structural Glued Laminated Timber Tensile Compressive Strength Tester；Structural laminated veneer lumber (LVL) Determination of structural properties Test methods； Large Span Artificial Board Flexural Tester；Wood Timber Artificial Board Testing Machine；MDF Artificial Board Tester；Wood-based Panels Large Span Flexural Tester；Impact Tester of Wood-based Panels；Structural Timber Characterization Tester；Characterization of structural timber Test methods；Dimension Lumber Characterization Tester；Standard for methods testing of timber structures；Timber structures Glued laminated timber Strength classes and determination；Structural timber Determination of characteristic values of mechanical properties and density；Assembled plywood case Mechanical Properties Tester；Standard Specification for Evaluation of Structural Composite Lumber Products；Scaffold decking components Mechanical Properties Tester；Standard for methods testing of timber structures；Method of testing in bending strength of wood；Method for determination of the modulus of elasticity in static bending of wood；Method of testing in shearing strength parallel to grain of wood；Methods of testing in tensile strength parallel to grain of wood；test method for compressive strength of the transverse fiber；Method of Testing in Cleavage Strength of Wood；Modulus of Elasticity in Compression Perpendicular to Grain of Wood；Laminated veneer lumber Mechanical Properties Tester；hrjtest；Block board Mechanical Properties Tester；Laminate flooring Mechanical Properties Tester；Determination of mechanical properties of wood based panels；Plywood Bonding quality Test methods；tensile strength perpendicular to the plane of the board；Sampling and cutting of test pieces and expression of test results；Polyvinyl acetate emulsion adhesives for woods；Glued laminated bamboo flooring Mechanical Properties Tester； Stress-graded Timber Tester；Bending Strength and Apparent Modulus of Elasticity；Tension Compression Strength Parallel to Grain；Beam Shear Strength；Bearing Strength Perpendicular to Grain；Bearing Strength Parallel to Grain；Modulus of Rigidity in Torsion；Tension Strength Perpendicular to Grain；Compression Strength and Modulus of Elasticity Perpendicular to Grain；Shear Strength at Joint Details；Testing Rectangular Sections of Sawn Solid Timber；Test method of evaluating the properties of glued-laminated timber；Visual grading rules for dimension lumber in light wood frame construction；Code for design of timber structures；hrjtest；Load code for the design of building structures；hrjtest；Code for acceptance of construction quality of timber structures；Technical code of glude laminated timber structures；Finger jointed structural dimension lumber in light wood frame construction；hrjtest；General specification for connector of light wood-frame construction；Log for lumber in light wood frame construction；Code for construction of timber structures；Technical code for light wood trusses；Sampling and judging methods for lot inspection of logs；Sampling and judging methods for lot inspection of sawn timbers；hrjtest；Tension Strength Hydraulically Operated Fixture；Applies to softwood glued laminated timber with four or more laminations；Characteristic values for strength stiffness density；Structural timber-Strength classes test；Strength graded structural timber with rectangular cross section；hrjtest；Wood-based panels Plywood structural design；hrjtest；Solid-wood panels Testing Machine；Gypsum plasterboards Definitions requirements and test methods；hrjtest；Structural timber Visual strength grading of tropical hardwood；Mechanical fasteners for gypsum plasterboard systems Tester；Gypsum boards with fibrous reinforcement；Gypsum fibre boards Tester；Plywood-Calculation method for some mechanical properties；
|
