试验机_济南恒瑞金试验机有限公司

500kN炭石墨制品抗壓強度試驗機；5kN炭石墨制品抗彎強度試驗機；GB/T13465.1-2014不透性石墨材料力學性能試驗方法總則；GB/T13465.2-2014不透性石墨材料抗彎強度試驗方法；GB/T13465.3-2014不透性石墨材料抗壓強度試驗方法；HRJ Tester；GB/T13465.4-2014不透性石墨材料沖擊強度試驗方法；GB/T13465.8-2009不透性石墨粘接劑粘接剪切強度試驗方法；GB/T13465.9-2009不透性石墨粘接劑粘接抗拉強度試驗方法；HRJ Tester；GB/T21921-2008不透性石墨材料抗拉強度試驗方法；GB/T3074.2-2008石墨電極彈性模量測定方法；GB/T33920-2017柔性石墨板試驗方法；JB/T8133.1-2013電炭制品物理化學性能試驗方法試樣加工技術規定；JB/T8133.6-2013電刷軟接線的脫出拉力；JB/T8133.7-2013電炭制品抗折強度；JB/T8133.8-2013電炭制品抗壓強度；HRJ Tester；JB/T8133.9-2013電炭制品抗拉強度；JB/T8133.10-2013電炭制品徑向抗壓強度；JB/T8133.13-2013炭柱機械強度；JB/T9141.2-2013柔性石墨板材抗拉強度測試方法；JB/T9141.3-2013柔性石墨板材壓縮強度測試方法；JB/T9141.4-2013柔性石墨板材壓縮率回彈率測試方法；JB/T9141.8-2016柔性石墨板材滑動摩擦系數測試方法；JB/T9141.9-2014柔性石墨板材取樣方法；JB/T7758.7-2008柔性石墨板應力松弛試驗方法；YB/T5288-1999石墨陽極耐腐蝕試驗方法；HRJ Tester；JB/T6370-2011柔性石墨填料環物理機械性能測試方法；JB/T6617-2016柔性石墨填料環技術條件；JB/T6620-2008柔性石墨編織填料試驗方法；GB/T29035-2012柔性石墨填料環試驗方法；SN/T1266-2003出口集裝袋裝鱗片石墨取制樣方法；JB/T8133.3-2013；JB/T8133.4-2013；NB/T20366-2015核電廠核級石墨密封墊片試驗方法；HRJ Tester；NB/T20367-2015核電廠核級石墨密封墊片鑒定規程；JB/T7609炭石墨材料抗沖擊強度試驗方法；JB/T8872-2016機械密封用炭石墨密封環技術條件；GB/T13465.5不透性石墨酚醛粘接劑收縮率試驗方法；GB/T40408-2021；DL/T2095-2020；GB/T21432-2021；GB/T24533-2019；GB/T30544.13-2018石墨烯及相關二維材料；GB/T3518-2008E；HRJ Tester；GB/T3519-2008E；GB/T38887-2020；HG/T5573-2019；HRJ Tester；HG/T5608～5609-2019；HG/T5810-2020；HG/T5824-2021；JB/T13846-2020；JB/T2750-2020；JC/T2441-2018建築絕熱用石墨改性模塑聚苯乙烯泡沫塑料板；JC/T2508-2019；JC/T2627-2021建築絕熱用石墨改性擠塑聚苯乙烯泡沫板GXPS；JC/T519-2020；NB/T20364-2015；NB/T20365-2015；SH/T3430-2018；YB/T4037-2017；YB/T4821-2020；GB/T1431-2019炭素材料耐壓強度測定；GB/T3074.1-2021炭素材料抗折強度測定；GB/T8721-2019炭素材料抗拉強度測定；GB/T1427-2016炭素材料取樣方法；鋁電解用炭素材料力學強度試驗機；預焙陽極陰極炭塊抗折強度試驗機；固體石墨材料抗折強度試驗機；GB/T26295-2010預焙陽極和陰極炭塊四點法測定抗折強度；ISO 12986.2；GB/T26297.1-2010鋁用炭素材料取樣方法底部炭塊；GB/T26297.2-2010鋁用炭素材料取樣方法側部炭塊；ISO 8007-3；GB/T26297.3-2010鋁用炭素材料預焙陽極；GB/T26297.4-2010鋁用炭素材料陰極糊；GB/T26297.5-2010鋁用炭素材料取樣方法煤瀝青；GB/T26297.6-2010鋁用炭素材料取樣方法煅後石油焦；GB/T38338-2019炭素材料斷裂韌性測定方法；HRJ Tester；GB/T39535-2020炭素材料肖氏硬度測定方法； GB/T40398.1-2021炭-炭複合炭素材料摩擦磨損性能試驗；GB/T40398.2-2021炭-炭複合炭素材料彎曲性能試驗；HRJ Tester；GB/T40406-2021炭素材料壓縮靜態彈性模量和泊松比測定方法；YS/T63.13-2016鋁用炭素材料檢測彈性模量的測定；YS/T63.15-2012鋁用炭素材料檢測耐壓強度的測定；YS/T63.27-2015鋁用炭素材料檢測預焙陽極斷裂能量的測定；ISO 11706；石墨炭素材料抗拉強度試驗機；石墨管抗壓抗折強度試驗機；炭磚抗壓強度試驗機；500kN炭石墨制品抗壓荷載試驗機；5kN炭石墨制品抗折荷載試驗機；炭石墨制品拉伸應力應變試驗機；四點負荷法測定炭素材料抗折強度；石墨電極芯撓曲斷裂模數試驗機；ASTM C1106；ASTM C904；ASTM E4-2016；ASTM E74-2013a；ASTM C565-2015；ASTM C749-2015；ASTM C651-2015；ASTM C1025-2015；ASTM D7779-2015；ASTM D4018-2011；ASTM C709；ASTM D7846-2016；ASTM C662-2016；CNS 2780；全自動鐵礦球團壓力試驗機；煤和岩石力學性能試驗機；300kN橡膠彈性墊板靜剛度試驗機；振動沖擊隔離器靜剛度試驗機；電子抗壓抗折強度試驗機；碳化矽制品抗折強度試驗機；水泥抗硫酸鹽侵蝕抗折強度試驗機；複合保溫外模板抗折荷載試驗機；300kN混凝土抗彎拉強度試驗機；全自動砂漿抗壓強度試驗機；微機全自動水泥抗壓抗折試驗機；10kN紙管壓力強度試驗機；5kN紙護角抗壓彎曲強度試驗機；包裝箱壓力和堆碼試驗機；通信光纜光纖接頭盒連接器扭轉彎曲疲勞試驗機；三維協調加載高速試驗機系統；高速高低溫拉伸試驗機系統；熱熔對接接頭高速拉伸沖擊試驗機；鋁及鋁合金板帶材高速拉伸試驗機；碳纖維材料應變控制高速拉伸試驗機；慢應變速率慢拉伸應力腐蝕試驗機；十字形試樣雙向拉伸試驗機；雙軸力對向壓縮材料力學試驗機；高強螺栓臥式拉伸試驗機系統；5kN波紋管縱向載荷試驗機；複合絕緣子芯棒應力腐蝕試驗機；邊坡柔性網網面抗拉強度抗頂破力試驗機；HRJ Tester；鋼絞線鋼筋臥式拉伸試驗機；無振動下拉上壓伺服液壓萬能材料試驗機；無振動鋼筋機械連接拉伸試驗機；鋼筋套筒灌漿連接件反複拉壓試驗機；大跨度人造板彎曲抗折強度試驗機；結構木材集成材力學特性試驗機；防火門啓閉可靠性試驗機；石膏板斷裂荷載硬度試驗機；三缸全自動鋼筋彎曲試驗機；603金屬材料管塑性變形彎管試驗機；鋼板鋼帶180°彎曲試驗機；板帶材彎曲強度試驗機；微機控制鋼軌靜彎曲試驗機；鐵路隧道盾構襯砌預制混凝土管片抗彎曲試驗機；玻璃彎曲強度試驗機；汽車防撞鋼梁板彎曲強度試驗機；HRJ Tester；電子伺服接骨板動態彎曲疲勞試驗機；帶柄股骨部件疲勞性能試驗機；椎間融合器生物力學性能試驗機；2工位浮封跑合磨損泄漏性能試驗機；密封圈模擬實際工況高低溫壓扭耐久試驗機；工程機械車輛刹車制動壓力扭矩試驗機；金屬波紋管垂向橫向二維高溫壓力疲勞試驗機；掘進機盤形滾刀摩擦磨損疲勞壽命試驗測試系統；支重輪磨合跑合疲勞耐久壽命試驗機；門式盤扣碗扣鋼管腳手架扣件構件試驗機；HRJ Tester；電液伺服混凝土軌枕靜載試驗機；超高性能混凝土抗拉強度試驗機；全級配混凝土小梁彎曲試驗機；陶瓷管材料彎曲強度抗折試驗機；

Carbon and Graphite Strength Tester；Tester for Compressive Strength of Carbon and Graphite；Tester for Flexural Strength of Carbon and Graphite；Standard Test Method for Compressive Strength of Carbon and Graphite；Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature；Standard Practices for Force Verification of Testing Machines；Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines；Carbon materials Determination of the compressive strength；determination of the flexure strength of graphite electrodes；determination of the elastic modulus of graphite electrodes；determination of tensile strength of carbonaceous materials；Sample method of carbon material；Carbon Brick Compression Flexure Testing Machine；Graphite Products Compressive Flexural Strength Tester；Carbon Materials Tensile Compressive Flexural Strength Tester；The test method for compressive strength of carbon materials；The test method for tensile strength of carbon materials；Carbonaceous materials used in the production of aluminium；Prebaked anodes and cathode blocks flexural strength tester；four-point flexural strength test method；Sampling of carbonaceous materials used for aluminium production；Cathode blocks Flexural Strength Tester；Sidewall blocks Flexural Strength Tester；Resisted impact strength experiment method of carbon-graphite materials；Standard Terminology Relating to Chemical；Specification for carbon-graphite sealing ring for mechanical seals；Resistant Nonmetallic Materials Mechanical Properties Tester；Test at a uniform rate 3000psi(20.7MPa)/min；determination of the flexure strength of graphite electrodes；determination of the elastic modulus of graphite electrodes；carbonaceous materials tensile strength tester；Fully Automatic Iron Ore Pellets Compression Tester；Coal and Rock Mechanical Properties Tester；Rubber Elastic Pads Static Stiffness Tester；Vibration Shock Isolators Static Stiffness Tester；Silicon Carbide Products Bending Strength Tester；Cement Flexure Strength Tester；Composite Thermal Insulation Outside Template Bending Load Tester；Concrete Flexural Tensile Strength Tester；Mortar Compressive Strength Tester；Cement Compressive Flexural Strength Tester；Paper Tube Compression Testing Machine；Paper Edge Corner Flexure Testing Machine；Transport Packages Compression Stacking Testing Machine；Packing Box Compression Stacking Tester；HRJ Tester；Three-Dimensional Coordinated Loading High Speed Tester System；High-speed High-Low temperature Tensile Tester；Butt Fusion Joints High-speed Tensile-Impact Tester；Aluminium alloy sheets and strips High-speed Tensile Tester；Carbon Fiber High-speed Strain Tensile Tester；Slow Strain Rate Tension Stress Corrosion Testing Machine；Cruciform Test Piece Biaxial Tensile Tester；Double Axial Force Material Mechanical Tester；High Strength Bolt Horizontal Tensile Tester System；Corrugated Pipe Axial Load Tester；Composite Insulator Core Stress Corrosion Tester；Steel Strand Steel Bars Horizontal Tensile Tester；No Vibration Servo Universal Materials Tester；No Vibration Rebar Mechanical Splicing Tensile Tester；Repeated Tensile Compressive Tester for Grout Sleeve Splicing of Rebars；HRJ Tester；Wood-based Panels Large Span Flexural Strength Tester；Structural Timber Characterization Tester；Fire-proof Door Shutter Testing Machine；Gypsum Board Breaking Load Hardness Testing Machine；HRJ Tester；Three-Position Steel Bar Bend Tester；Metal Materials Bending Tester；Metal Materials Tube Plastic Deformation Bend Tester；Steel Sheet and Strip Bending Strength Tester；Steel Rails Bending Testing Machine；Reinforced Concrete Segment Bending Tester；Glass Bending Strength Testing Machine；Crash beam Bending Strength Testing Machine；Electronic Servo Dynamic Metallic Bone Plates Fatigue Tester；Stemmed Femoral Components Endurance Properties Tester；Intervertebral Body Fusion Device Biomechanics Tester；2 Station Floating Seal Running Wear Leakage Performance Tester；Sealing Ring High Low Temperature Compressive Torsion Fatigue Tester；HRJ Tester；Construction Machinery Vehicles Brake Moment Tester；Corrugated Pipes Two-Dimensional High Temperature Fatigue Tester；Tunnel Boring Machine Disc Cutter Friction Wear Fatigue Life Testing System；Track Rollers Running Wear Fatigue Durability Life Tester；Tester for Frame Scaffolding With Steel Tubules；Concrete Sleeper Static Loading Testing Machine；Ultra-high Performance Concrete Tensile Strength Tester；Fully-graded Concrete Flexural Strength Tester；Ceramic Pipes Flexural Strength Tester；