首頁 >> 産品展示 >> 2kN.m～40kN.m預載荷螺栓連接副試驗系統Preloading Structural Bolting Assemblies Test System
2kN.m～40kN.m預載荷螺栓連接副試驗系統
Preloading Structural Bolting Assemblies Test System
重要功能：
→預載荷高強度栓接結構連接副試驗；高強度螺栓組件測試；鋼結構栓接連接副試驗。
→栓接結構扭拉測試；螺栓螺母墊圈連接副測試；預載荷適應性試驗；栓接結構預緊力；螺栓軸力測試；螺栓和螺母相對轉角；轉角-螺栓軸力曲線；扭矩-螺栓軸力曲線；伸長-螺栓軸力曲線；0.2％螺栓永久延伸。
→栓接連接副扭矩測試；極限緊固扭矩；扭矩系數單個值；扭矩系數平均值；變異系數；螺栓緊固軸力極限值；螺栓緊固軸力極限值的平均值；HRJ Tester；連接副旋轉拉力曲線；螺栓扭矩拉力曲線；螺栓延伸拉力曲線；扭矩法；扭矩-扭角法；預拉伸法；自動控制法；螺母螺栓支撐面摩擦系數；螺紋摩擦系數；總摩擦系數。
→預載荷栓接結構總成試驗；工業建築栓接連接副試驗；民用建築栓接連接副試驗；橋梁栓接連接副試驗；風電機組螺栓連接副試驗；塔架高強度螺栓連接副試驗；塔桅栓接連接副試驗；鍋爐栓接連接副試驗；起重機械栓接連接副試驗；HRJ Tester；扭剪型栓接連接副試驗；HV大六角栓接連接副試驗；HR大六角栓接連接副試驗；M39～M64大六角頭螺栓連接副試驗；M12～M36大六角頭螺栓連接副試驗；單一栓接連接副試驗；擴展栓接連接副試驗。
重要參數：
→SBAT2kN.m～40kN.m預載荷螺栓連接副試驗系統；
→螺栓連接副試驗荷載2kN.m/3kN.m/5kN.m/10kN.m/20kN.m/30kN.m/40kN.m；
→栓接連接副擰緊轉速0.1～10r/min；
→螺栓軸力荷載500kN/700kN/1000kN/1500kN/2000kN/3000kN/4000kN；
→預載荷試驗旋轉半徑≥100mm～500mm；
→高剛性、高穩定性、無振動沖擊流線型荷載機架，1.2～1.5倍試驗剛度；
→人體工程學設計，機宜人、人適機，符合人-機-環境系統，高效、健康、舒適、安全；
→內置式全數字閉環、多通道、多功能、易操控的HRJ-Test連接副測控軟件/可定制英文版；多種標准方法（國標、國軍標、英標、美標、德標、日標、意標、俄標、法標、澳標、歐標等/GB、GJB、ISO、JIS、ASTM、DIN、BS、NF、EN、AS、NBR、IEC、GOST、CNS、APA)；
→可定制攝像系統，實時記錄螺栓扭轉試驗過程，圖像采集系統與軟件操控系統同步通訊；
→可定制栓連接大扭拉和小扭拉二合一試驗機，實現大規格螺栓和小規格螺栓扭拉一體試驗。
引用標准、文獻文件：
→GB/T32076.2-2015預載荷高強度栓接結構連接副預載荷適應性；
→NB/T31082-2016風電機組塔架用高強度螺栓連接副；
→GB/T3632-鋼結構用扭剪型高強度螺栓連接副；
→GB/T16823.3-緊固件 扭矩-夾緊力試驗；
→GB/T3098.1-緊固件機械性能 螺栓、螺釘和螺柱；
→GB/T32076.1-2015；GB/T32076.3-2015；HRJ Tester；GB/T32076.4-2015；GB/T32076.5-2015；GB/T32076.6-2015；GB/T32076.7-2015；GB/T32076.8-2017；GB/T32076.9-2017；GB/T32076.10-2018；GB/T6170-2015；GB/T3106-2016；GB/Z32564-2016；GB/T192；GB/T1228；GB/T1229；GB/T1230；GB/T1231；GB/T5782-2016；GB 50205；
→EN 14399-1；EN 14399-2；EN 14399-3；EN 14399-4；HRJ Tester；EN 14399-5；EN 14399-6；EN 14399-7；EN 14399-8；EN 14399-9；EN 14399-10；JIS B1009；JIS B1166；EN 16047；DIN 103-7；ISO 103-8；DIN 2510-5；DIN 558；DIN 601；DIN 931；DIN 933；DIN 960；DIN 961；ASTM A183；ASTM A563；ASTM.A320M；ASTM A354；ASTM A325；ASTM A307；ASTM F3125；HRJ Tester；ASTM F959；ASTM F2437；ISO 272；ISO 898-1；NF E25-036；ISO/TR 16224：2012；CNS 12209；60000psi碳鋼螺栓螺柱及螺杆；120/105ksi結構鋼螺栓；HAT2000N.m/500kN高強螺栓自動測試儀；3000N.m～50000N.m高強螺栓連接副扭矩試驗機；0.5N.m～50kN.m高低溫扭轉試驗機；
High-Strength Structural Bolting Assemblies Test；Preloading High-Strength Structural Bolting Assemblies Test；Bolting Assemblies Torque Coefficient Test；HRJ Tester；Torque Clamp Force Testing；Wind Turbine Bolting Assemblies Test；Bolting Axial Force Test；Bolting Torque Test；Bolting Torque Coefficient Test；HRJ Tester；Coefficient of friction between bearing surfaces under nut or bolt head；Coefficient of friction between threads；Coefficient of total friction；
High-strength structural bolting assemblies for preloading；General requirement；Suitability for preloading；HRJ Tester；System HR-Hexagon bolt with large width across flatsand nut assemblies；System HV-Hexagon bolt with large width across flats and nut assemblies；Plain washers；M39～M64-Hexagon bolt with large width across flats and nut assemblies；HRJ Tester；Torshear type bolt with cup head，and nut assemblies；Torshear type bolt with hexagon head with large width across flats,and nut assemblies；assembly specifications；
Nut design guide；Hexagon nuts style 1；British Standard；High strength bolts with large hexagon head for steel structures；HRJ Tester；High strength large hexagon nuts for steel structures；High strength plain washers for steel structures；Fasteners；Width Across Flats For Hexagon Products；High-Strength Bolting Assemblies For Tower on Wind Turbine；HRJ Tester；Specifications of high strength bolts with large hexagon head,large hexagon nuts；plain washers for steel structures；Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures；Code for acceptance of construction quality of steel structures；HRJ Tester；Fasteners-Torque clamp force testing；Mechanical properties of fasteners-Bolts；Measuring method for friction coefficient of screw thread pair of automobiles；Sets of high strength torque control bolt；Fasteners Bolts screws and studs Nominal lengths and thread lengths；HRJ Tester；High-Strength Structural Bolting Assemblies For Preloading；Suitability For Preloading；
Bolted Connections with Reduced Shank；standard specification for carbon steel track bolts and nuts；Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service；
Standard Specification for High Strength Structural Bolts；HRJ Tester；Steel and Alloy Steel Heat Treated；120ksi(830MPa) and 150ksi(1040MPa) Minimum Tensile Strength；Inch and Metric Dimensions；
|
